See below for important information regarding this job. Additional vacancies may be filled from this announcement.

Duties

If selected at the GS-11 level, duties will be performed in a developmental capacity. Focal point for manufacturing/industrial engineering aspects of the Operations Systems Evaluation (OSE) for assigned contractor(s)/programs. Evaluates contract requirements to determine system adequacy/compliance and evaluates contractor decisions on cost and technical trade-offs such as make/buy decisions. Reviews contractor application of Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) techniques. Determines compliance with contract Manufacturing Technology (MANTEC) and Industrial Modernization Incentive Program (IMIP) requirements. Provides engineering expertise and information on industrial and manufacturing engineering issues to the Program Support Team (PST) and Program Office. Provides engineering support for non-major defense acquisition programs and smaller non-program managed contracts for the Contract Administration Office (CAO) Reviews contractor-proposed methods for Basis of Estimates for direct labor and material costs for technical work elements. Supports the surveillance team by conducting selective tests of reported data and periodic evaluations of internal practices related to manufacturing/industrial operations. Reviews/evaluates contractor producibility/concurrent engineering and transition from development to production. Serves on a Pre-Award Survey (PAS) team assessing prospective contractors’ technical and manufacturing capabilities and conducts Post-Award reviews to ensure that potential contractors fully understand the contract requirements.

Requirements

• Must be a U.S. citizen
• Security Requirements: Non-Critical Sensitive with Secret Access
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.

Qualifications

A. Basic Requirement: A Bachelor's Degree or higher in professional engineering. To be acceptable, the program must: (1) be in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR A combination of education and experience. College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the Basic Requirements above. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in the Basic Requirements above. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position and is directly in or related to this position. To qualify at the GS-12 level, applicants must possess one year of specialized experience equivalent to the GS-11 level or equivalent under other pay systems in the Federal service, military or private sector. To qualify at the GS-11 level, applicants must possess one year of specialized experience equivalent to the GS-9 level or equivalent under other pay systems in the Federal service, military or private sector. Applicants must meet eligibility requirements including minimum qualifications, and any other regulatory requirements by the cut-off/closing date of the announcement. Creditable specialized experience includes: GS 12 Planning and managing industrial engineering projects. Assessing manufacturing and quality trend data to recommend improvements. Analyzing contractor performance data including manufacturing engineering, supply chain management, industrial analysis, and Earned Value Management (EVM) performance and compliance. Planning, scheduling, and reviewing analyses of data, processes, procedures, manpower, equipment, materials, and work quality. GS 11 Assisting planning and managing industrial engineering projects. Assisting assessing manufacturing and quality trend data to recommend improvements. Assisting analyzing contractor performance data including manufacturing engineering, supply chain management, industrial analysis, and Earned Value Management (EVM) performance and compliance. Assisting planning, scheduling, and reviewing analyses of data, processes, procedures, manpower, equipment, materials, and work quality. C. Education Substitution: Such education must demonstrate the knowledge, skills, and abilities necessary to do the work. Education must be from a college or university accredited by an organization approved by the U.S. Department of Education. See http://ope.ed.gov/accreditation/Search.aspx. If using education to meet basic qualifications, YOU MUST SUBMIT A TRANSCRIPT as supplemental documentation. To qualify based on education in lieu of specialized experience, you must possess: GS-11: Three (3) full academic years of progressively higher-level graduate education or Ph.D. or equivalent doctoral degree. D. Combination: Combinations of successfully completed post-high school education and experience may be used to meet total qualifications and may be computed by first determining the applicant's total qualifying experience as a percentage of the experience required for the grade level; then determining the applicant's education as a percentage of the education required for the grade level; and then adding the two percentages. The total percentages must equal at least 100 percent to qualify an applicant for that grade level. Only graduate education in excess of the amount required for the next lower grade level may be used to qualify applicants for positions at grade GS-11.

Education

If the position has a minimum education requirement you MUST provide transcripts (unofficial are acceptable at the time of application) to support your educational claims. Or, if you are using education to qualify in lieu of specialized experience you MUST provide transcripts (unofficial are acceptable at the time of application) to support your educational claims. The transcripts must include your name, the name of the college or university, class/course list, completed number of credits/hours, and the date degree conferred (if applicable). Education must be accredited by an accrediting institution recognized by the U.S. Department of Education. Licenses must be current at time of application.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.

Contacts

• Address DCMA - CENTRAL REGION 1523 W Central Rd Bldg 203 Arlington Heights, IL 60005 US
• Name: DHRSStaffing DCMA Central
• Phone: 614 692-6765
• Email: [email protected]