About the Position: Provide technical expertise in the construction of large and substantial projects, by performing complex and difficult engineering work, and reviewing and advising on design and other related work performed by others. This position is located within the US Army Corps of Engineers, Huntington District, Engineering and Construction Division.

Duties

Serves as a Project Engineer on the staff of the Resident Engineer responsible for the contract administration of multiple construction contracts. Performs professional engineering duties of civil, mechanical and/or electrical associated with the construction of large civil works projects, locks and dams, flood control reservoirs, utilities, office buildings, etc. Reviews project plans and specifications prior to and during the construction period to determine practicability from construction standpoint. Prepares Government estimates, reviews contractor's proposals and assists in negotiations with contractor while reviewing drawings, schedules, equipment layouts, etc., to assure that drawings are in compliance with contract specifications. Negotiates contract modifications and provides documentation to support Government position on claims. Monitors construction progress and furnishes information for progress reports. Advises lower grade employees, contractor's and subcontractor's key personnel on testing problems; construction, and installation of equipment. Monitors contractors’ quality control and inspection programs which include responsibility for conducting tests, observing tests, recognizing and detecting design problems, etc. Provide support to field staff for contract administration while advising Administrative Contracting Officer/Resident Engineer on matters pertaining to contract administration.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the OrganizationCurrent Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Executive Order (E.O.) 12721Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPeople with Disabilities, Schedule APriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleRe-employed AnnuitantReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Interdisciplinary Project Engineer (Civil, Mechanical, or Electrical Engineer): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: For GS-11: Specialized Experience: One year of specialized experience which includes aiding in review of construction project plans and specifications; preparing government estimates and contractor proposals for review; supporting the development of shop drawings, schedules or equipment layouts; preparing contract modifications; investigating construction issues and or develop remedies to resolve deficiencies; and assessing contractor's work performance. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. For GS-12: Specialized Experience: One year of specialized experience which includes utilizing available resources to maintain progress for major construction projects; reviewing project schedules; requesting proposals and reviewing of technical submittals with contractors; preparing contract modifications; and ensuring large civil works projects are constructed in accordance with contract plans and specifications with professional engineering duties. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). You will be evaluated on the basis of your level of competency in the following areas: Contract AdministrationContract ManagementOral CommunicationProject ManagementProject Planning, Design, and Construction Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09). Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RE-W2SM01 US ARMY ENGINEER DISTRICT-HUNTINGTON DO NOT MAIL Huntington, WV 25701 US
• Name: Army Applicant Help Desk