About the Position: This is an Interdisciplinary, GS-11/12 position with the U.S. Army Corps of Engineers, Northwestern Division (NWD), Omaha District, Planning, Programs, & Project Management Division

Duties

Serve as Project Manager (PM) with responsibility for planning, programming, directing, reviewing, and ensuring performance of the environmental remediation mission projects in the Omaha District. Serves as Project Manager, responsible for the overall management, control, coordination and execution of assigned projects. Make field trips to environmental remediation sites to observe and advise on the solution of problems encountered during investigations or remediation phases. Coordinate the planning, design, cost estimating, remedial action, and environmental restoration, etc. for engineering projects of substantial scope and complexity. Control and manage project milestones and budgets from planning through remedial action and initial operations. Allocate project funds to district elements, consistent with progress attained and measure and monitor performance to assure commitments of all parties are being maintained.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesDomestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Basic Requirement for Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Chemist: A. Degree: Bachelor's degree (or higher degree) in the physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics. OR B. Combination of Education and Experience: Course work equivalent to a major in the physical sciences, life sciences, or engineering, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education. You will be evaluated on the basis of your level of competency in the following areas: Financial ManagementOral CommunicationProject Management

Education

Basic Requirement for General Biological Scientist:
A. Degree: Bachelor's degree (or higher degree) in biological sciences, agriculture, natural resource management, chemistry, or related disciplines appropriate to the position.
OR
B. Combination of Education and Experience: Courses equivalent to a major, as shown in A above, plus appropriate experience or additional education.

Basic Requirement for General Physical Scientist:
A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
OR
B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Basic Requirement for Geologist:
A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography.
OR
B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education.(Note:Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience GS-11: One year of specialized experience which includes: 1) Developing project scope requirements and milestones for multi-purpose projects; AND 2) Monitoring milestones to ensure projects are within budget and on schedule. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).

Specialized Experience GS-12: One year of specialized experience which includes: 1.) Implementing environmental policies and guidelines to ensure compliance; AND 2) Developing project scope requirements and milestones for multipurpose projects; AND 3) Monitoring milestones to ensure projects are within budget and on schedule. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience. In order to qualify for this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RH-W07106 US ARMY ENGINEER DISTRICT-OMAHA DO NOT MAIL Omaha, NE 68102 US
• Name: Army Applicant Help Desk