About the Position: This position is located within the Engineering and Construction Division, Design Branch, Civil Design Section where you will utilize a wide range of professional engineering concepts, principles and practices, and sufficient experience to prepare construction contract documents for complex civil engineering features of river navigation systems, local flood protection, flood control reservoirs, and civil site development to include water, sewage, roads, and drainage.

Duties

Plan, organize and direct the combined efforts of a team of engineering technical staff members in preparing design reports, contract plans and specifications. Develop project schedules and budgets for the technical elements of a Project Delivery Team (PDT). Prepare engineering drawings, detailed plans, technical specifications, quantity estimates, general designs, and computations for civil engineering features of projects. Review and check contract drawings, quantity estimates and technical provisions of the specifications for conformance with good engineering practice. Represent the District when dealing with local, state, and municipal authorities and is primary point of contact on technical issues with customers. Provide advice and guidance to lower level engineers, technicians and other employees on solutions to technical problems.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Engineer: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting one of the basic education requirements above, to qualify for this position you must also meet the experience requirements listed below. Specialized Experience: One year of specialized experience which includes as developing civil site conceptual designs, alternative analysis, and contract plans and specifications using engineering procedures, requirements, and regulations for civil works projects such as levees, floodwalls, roadways, facilities, water distribution systems and sanitary sewer utilities; proficient in using software such as MicroStation with Inroads, or AutoCAD with Civil 3D; developing budgets and cost estimates for assigned projects; and overseeing and advising lower graded personnel. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address RE-W2SM01 US ARMY ENGINEER DISTRICT-HUNTINGTON DO NOT MAIL Huntington, WV 25701 US
• Name: Army Applicant Help Desk