This is a developmental position with known promotion potential to the target position of 6O-SCPD 6O9GL72, General Engineer, GS-0801-12. The primary purpose of this position is to serve as a professional general engineer, performing design, project programming, construction management/monitoring duties and improvement projects of real property facilities and infrastructure, including utility systems in support of a military installation. (Note: Continued in Additional Information section)

Duties

Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of engineering. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of general engineering and knowledge of architecture to ensure overall compliance with contracted specifications, schedules, etc. Plans, programs, budgets, and executes required projects in support of assigned programs. Performs work in facilities operations and maintenance (O&M) functions. Provides consulting services and project coordination. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Leave accrual may be authorized upon request
• Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position.
• May act as project liaison with the Army Corps of Engineers or other design agencies as required.
• May be required to serve on A and E selection boards.
• Employee must meet Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. The selectee will have up to 24 months to meet the applicable mandatory experience, education, and training requirements.
• Must be able to obtain and maintain a Secret Clearance.
• This is a drug testing designated position. The incumbent is subject to random testing for drug use. This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Testing Program. (Cont...)
• Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety. (Cont...)
• Incumbent of this position is subject to the possibility of a random drug test.

Qualifications

In order to qualify, you must meet the requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Group Coverage Qualification Standard for Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: Click HERE to view the basic occupational requirements for this position. Note: Applicants who meet the basic requirements described in the individual occupational requirements are fully qualified for the specified entry grade GS-05. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE FOR GS-07/09: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-05 FOR GS-07, and at least one (1) year of specialized experience at the next lower grade GS-07 FOR GS-09, or equivalent in other pay systems. Examples of specialized experience include knowledge of the principles, concepts, and theories of the classified title, and the standard practices, methods, and techniques of the occupation sufficient to perform difficult, but well-precedented assignments; Knowledge of analysis, evaluation, fact-finding, and investigative techniques in order to gather data, identify significant factors, and recommend a solution from a number of possible alternatives; Knowledge of the occupation to perform studies and prepare reports, documentation, and correspondence to communicate factual and procedural information clearly; Skill in applying the principles, concepts, and practices of the occupation sufficient to perform moderately difficult assignments; Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in an appropriate manner with peers and management; Ability to learn and apply analytical investigative techniques to accomplish work in the subject-matter field. OR EDUCATION (GS-07): One full year of graduate level education in engineering or in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position; or a bachelor's degree in engineering with Superior Academic Achievement. NOTE: You must submit a copy of official transcripts. EDUCATION (GS-09): Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in engineering or a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. NOTE: You must submit a copy of official transcripts. OR COMBINATION OF EXPERIENCE AND EDUCATION: A combination of education and experience may be used to qualify for this position for both the GS-07 and GS-09 levels, as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts. SPECIALIZED EXPERIENCE FOR GS-11: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-09, or equivalent in other pay systems. Examples of specialized experience include professional knowledge of a wide range of multidisciplinary engineering theories, concepts, principles, standards, and methods sufficient to determine and/or execute actions for a wide range of assignments involving combinations of complex features; Knowledge of engineering standards and methods to formulate, execute, advise on, and explain recommendations or solutions to modify standard practices, equipment, devices, processes, and techniques and resolve a wide variety of complex problems; Knowledge of advanced processes and practices to provide oversight and direction; to adapt precedents or existing strategies to meet unusual needs or special demands; and to prepare, present, and evaluate plans, designs, reports, and correspondence; Knowledge of the principles of planning and program management; standard acquisition regulations, practices, and procedures; and other engineering disciplines. OR EDUCATION (GS-11): Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. NOTE: You must submit a copy of official transcripts. OR COMBINATION OF EXPERIENCE AND EDUCATION: A combination of education and experience may be used to qualify for this position at the GS-11 level as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts. SPECIALIZED EXPERIENCE FOR GS-12: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience include professional knowledge of civil, mechanical and electrical engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments; Knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications; Knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings; Knowledge of and familiarity with related fields of work such as architectural, civil, electrical, mechanical, structural and environmental engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations; Comprehensive knowledge of the installation/command mission and organization; Broad understanding of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services; Skill in technical writing sufficient to develop solutions to problems such as procedures and methods of installation of material, extent or scope of work to be performed, quality of materials to be installed, and acceptable levels of workmanship. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-05 level is required to meet the time-in-grade requirements for the GS-07 level. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-09 level. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-11 level. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): See Education section for KSAs. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

KSAs for GS 05/07/09/11:
1. Knowledge of basic principles of the classified titled or related field.

2. Skill in communicating factual and procedural information clearly, orally and in writing.

3. Ability to learn basic techniques of the classified title.

4. Ability to analyze problems to identify significant factors, gather pertinent data, and recognize solutions.

5. Ability to plan and organize work, and consult effectively with co-workers.

KSAs for GS-12:
1. Professional knowledge of civil, mechanical and electrical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines

2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; of environmental principles, practices, procedures, laws, regulations, and current legislative issues; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds.

3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions; and knowledge of program planning and budgeting cycles, financial control and budget systems and management.

4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings; and technique / skill in drafting sufficient to convey design concepts and ideas and formulate working drawings.

5. Ability to plan, conduct and record site/facilities surveys and inspection; to analyze, interpret, and apply results, rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.

6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships.

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address Grand Forks AFB 226 Steen Blvd Bldg 101 Grand Forks AFB, ND 58205 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]