You will serve as an Electronic Warfare Subject Matter Expert (SME) and Technical Lead System Engineer in the ELECTRONIC WARFARE SYSTEMS Branch (code 3421) of NAVUNSEAWARCENDIV NEWPORT RI. This position is part of the Warfare Centers Personnel Demonstration Project. The ND-05 pay band encompasses positions equivalent to GS-14 and GS-15. The ND-04 pay band encompasses positions equivalent to GS-12 and GS-13.

Duties

You will be the NUWC BLQ-10 Electronic Warfare Subject Matter Expert (SME) and Technical Lead System Engineer. You will define and modify overall objectives and requirements in Electronic Warfare (EW) and evaluate feasibility of new concepts and principles. You will make recommendations on the continuance or abandonment of new technologies for the BLQ-10 and EW program. You will provide technical and expert advice by briefing top level Navy management, Program office, other agencies and private organizations. You will provide consultant to other technical experts in the field of Electronic Warfare. You will be responsible for the technical planning, direction and success of new capabilities introduced into the EW program by following the Sponsors defined funding, resources and agency policies. You will direct, guide, and oversee the BLQ-10 Integration, testing, cybersecurity, troubleshooting and evaluation efforts. You will provide leadership and guidance to BLQ-10 subsystem teams on current and future strategic efforts that could cause the modification of procedures and integration needs. You will lead with technical guidance to Senior-Level, Mid-Level and junior engineers; align junior engineers with a system engineering “mentor” to become familiar with the BLQ_10 system and other SWFTS subsystems. You will complete on time, branch administrative functions and policy (timecards, weekly inputs, training, demo performance/feedback forms, delinquent list avoidance, etc).

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position requires the incumbent to ride/work on submarines.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This is a bargaining unit position.

Qualifications

This is an interdisciplinary position and may be filled by a Mechanical Engineer (0830-series), an Electrical Engineer (0850-series), a Computer Engineer (0854- series) an Electronics Engineer (0855-series), or a Physics Engineer (1310-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0830, 0850, 0854, 0855, and 1310) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications. For the ND-5: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-4 pay band (GS-12/13 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer or scientist managing administrative and technical aspects of projects in support of submarine electronic combat and weapons systems. For the ND-4: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-3 pay band (GS-9/11 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer or scientist providing administrative and technical advice and guidance on projects in support of submarine electronic combat and weapons systems. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series all-professional-engineering-positions-0800.pdf (opm.gov) Mechanical Engineering Series 0830 (opm.gov) Electrical Engineering Series 0850 (opm.gov) Computer Engineering Series 0854 (opm.gov) Electronics Engineering Series 0855 (opm.gov) Physics Series 1310 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For the Professional Engineering 08XX series:
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:.

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

For the 1310:

1. Degree: physics; or related degree that included at least 24 semester hours in physics.

   or

2. Combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education.

In either A or B above, the courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.

Contacts

• Address NAVUNSEAWARCENDIV NEWPORT RI 1176 Howell Street Newport, RI 02841-1708 US
• Name: Department of Navy EIC
• Email: [email protected]