THIS IS A NATIONAL GUARD TITLE 5 EXCEPTED SERVICE POSITION. This National Guard position is for Enviromental Engineering, Position Description Number T5210000 and is part of the 158th Fighter Wing Command of the Vermont Air National Guard. This position is a dual announcement, also advertised as a permanent Title 5 vacancy announcement, VT-11942134-AR-24-37 https://www.usajobs.gov/GetJob/ViewDetails/795166200. One qualified candidate will be selected from the dual announcement.

Duties

This position is located in the Base Environmental Management Office and serves as the installation Environmental Program Manager for the assigned Air National Guard (ANG) installation. Serves as the single point of contact for the initiation, development, and execution of all environmental activities and development of regulatory guidance for an installation and its immediate geographic region, with a collaborative influence extending to a broader area. Regional responsibilities may include, but are not limited to: aircraft mishap response, off site release assessments, air emission estimates, storm water discharge monitoring, and hazardous material shipments. Broader geographic impacts may include, but are not limited to: exporting project solutions, staff assistance visits, compliance assessments, and partnering with other units and intra-agency contacts to address challenges that affect multiple ANG units within or beyond state boundaries. Accomplishes long range environmental planning, budgeting, and programming activities that impacts the installation and the region. Reviews engineering planning and construction documents for environmental considerations as required. MAJOR DUTIES: 1. Manages a most complex, highly technical environmental management and protection program and serves as the installation's single most knowledgeable expert on DoD, AF, ANG, EPA state specific environmental laws and regulations. Environmental Management duties and responsibilities include, but are not limited to: (1) Hazardous Waste Management; (2) Storm Water Management and Control; (3) Air Quality; (4) Water Quality; (5) Pollution Prevention; (6) Green Procurement;(7) Environmental Restoration Program (ERP); (8) Cultural and Natural Resources Management; (9) Spill Prevention and Response; (10) Environmental Management System; (11) Environmental Impact Analysis Program (EIAP) Management; and (12) Qualified Recycling Program Management. 2. Manages the entire Planning, Programming, Budget and Execution (PPB&E) for the installations environmental quality (EQ) program area. Additional budgetary responsibilities may include working with the Defense Logistics Agency (DLA) Energy and Environment for recurring environmental costs related to DLA owned fuel systems. Provides financial analysis and planning for Environmental resource requirements, to include planning, programming and execution. Responsible for planning, budgeting, and reporting environmental financial information through directed financial databases. 3. Prepares and guides implementation of environmental program plans. Environmental program plans can include, but are not limited to (1) Spill Prevention Control and Countermeasures (SPCC) Plan; (2) Storm Water Pollution Prevention Plan (SWPPP); (3) Hazardous Waste Management Plan (HWMP); (4) Air Emissions Inventory (AEI); (5) Green Procurement Plan (GPP); (6) Integrated Pest Management Plan; (7) Refrigerant Management Plan; (8) Cultural or Natural Resources Management Plans; (9) Environmental Management System (EMS) Plans; and (10) Integrated Solid Waste Management Plan. 4.Serves as an active member of the installation Design Working Group (DWG) accomplishing short term and long-range planning in conjunction with Civil Engineering for future military construction and renovation projects. Responsible for ensuring all necessary environmental permits for related construction projects are obtained and necessary plans developed and implemented. 5. In accordance with the Environmental Impact Analysis Process (EIAP)statutory requirements, the incumbent is responsible for evaluating the environmental impact of construction and renovation projects. Facilitates the decision making process ensuring due consideration is given to the natural environment, social, political, economic, and governance factors and provides a holistic frame work designed for the achievement of sustainable outcomes. 6. Plans and schedules work in a manner that promotes a smooth flow and even distribution. Coordinates plans and schedules with other organization managers and customers as appropriate. Identifies need for changes in priorities and takes action to implement such changes. Plans work to be accomplished by subordinates, sets and adjusts short-term priorities, and prepares schedules. Assigns work to subordinate employees based on organization priorities and consideration of difficulty and requirements of assignments such that the experience, training, and abilities of staff are effectively utilized to meet organization and customer needs. Balances workload and provides advice, guidance, and direction on a wide range of policy, investigative, inspection/exercise, strategic planning, and administrative issues. Structures assignments to create effective and economical positions. Coordinates with other organization managers and customers as appropriate. **REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES**

Requirements

• Work may require access to classified information. Must be able to obtain and maintain the appropriate security clearance.
• The incumbent of this position description must have at a minimum, a completed National Agency Check (NAC) prior to position assignment
• Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
• The employee may be required to travel in military and/or commercial aircraft to perform temporary duty assignments.
• The work may require the employee to drive a motor vehicle and if so, an appropriate valid driver's license is required.
• Participation in direct deposit is mandatory.
• May be required to successfully complete a probationary period.
• This position is subject to provisions of the DoD Priority Placement Program.
• Males born after 31 December 1959 must be registered for Selective Service.

Qualifications

OPEN AREAS OF CONSIDERATION: AREA 1, 2,3, 4 Priority Placement Program will be cleared. Area I: Area I: Current On-board Title 5 or Title 32 Dual Status Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite or 4-Term ) - Only those current Vermont National Guard employees who are in permanent, indefinite, or term technician status as result of being competitively hired by the VTNG. Area II: All current Federal Employees from any agency. Area III: All current and former members of the VTNG Area IV: United States citizens Basic requirements for Engineering positions: The Engineering occupation has specific educational requirements. You are required to submit a copy of your official transcript with your application package to validate education requirements. Application packages without a transcript will be determined incomplete. BASIC REQUIREMENT: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. IN ADDITION TO MEETING THE BASIC REQUIREMENT, to qualify for this position you must also meet the specialized experience described below. SPECIALIZED EXPERIENCE GS-12- must have 1-year equivalent to at least next lower grade level experience, education, or training for management, supervision, or performance of (1) planning, designing, construction, and/or maintaining structures and facilities; and (2) investigating, measuring, surveying, and mapping the earth's physical features. FEDERALTIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in­-grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. OTHER CONDITIONS OF EMPLOYMENT & NOTES: -This position is subject to the Lautenberg amendment to the gun control act of 1968 which makes it a felony for anyone who has been convicted of a misdemeanor crime of domestic violence to ship, transport, possess, or receive firearms or ammunition. Civilian personnel of the Department of the Defense are not exempt from this provision. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. -This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration. This designation will not exceed 14 calendar days per year unless otherwise approved in advance by the TAG. Please be advised: 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed. 3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience. 4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts. Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement.

Education

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address 158th Fighter Wing Command 105 NCO Drive South Burlington, VT 05403 US
• Name: Nathan Brimmer
• Phone: (802)338-3634
• Email: [email protected]