Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to install, modify, test, troubleshoot, maintain, and repair electric power controlling equipment and/or distribution lines.

Duties

- Installs, modifies, tests, repairs, and maintains transformers, converters, regulators, cables, switches, circuit breakers, mechanical and electronic systems, and other circuit elements found in substations. - Installs, modifies, connects, inspects, and repairs overhead and underground electrical distribution lines. - Troubleshoots distribution circuits and generating and controlling equipment. - Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. - Uses and maintains various hand and power tools and test equipment such as oscillators, meggers, phase sticks, phase rotation meters, digital test equipment, and cable locating and fault finding equipment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• May occasionally be required to work other than normal duty hours and/or Shift work may be required which may include overtime and/or irregular hours.
• IAW SA-2020-25 This position requires a physical/medical examination. The physical/medical requirements of this position as determined are: ability to discern colors and contrast, climb ladders, and lift up to 50 pounds.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
• drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• May be required to perform duties as a GPC Cardholder.
• Must be able to obtain and maintain the appropriate security clearance.
• The duties of this position meet all requirements as a category 4 designation, and shall not be vacated during a national emergency or mobilization without seriously impairing the capability of the parent Federal Agency or office
• to function effectively. This position must be removed from the Ready Reserve and cannot become a member of the Ready Reserve. (IAW: DoDD 1200.7, "Screening the Ready Reserve,")
• This is a Mission-Essential position performing a Mission-Critical-Function which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions.
• The physical retirements of this position as determined by the manager are: The employee frequently performs moderately heavy lifting, pulling, and carrying of equipment and material weighing up to 18 kilograms (40 pounds) in ground
• and occasionally, lifts or pulls heavy cables and equipment weighing more than 23 kilograms (50 pounds) with the help of weight handling equipment or with assistance from other workers. Work aloft on poles, at ground level, and
• trenches or manholes. Work requires bending, stooping, climbing, and standing for long periods, must be able to distinguish colors and shades of colors. At times, works in awkward positions and
• restricted spaces where coordination of hands, legs, and body are needed to perform tasks.
• May be required to possess a valid operator’s license in order to drive a motor vehicle to and from work sites. AND/OR , may be required to procure a government operator’s permit or obtain a commercial driver’s license to
• drive and/or operate special electrical repair trucks and/or obtain a flight line drivers license.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2800 Electrical Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ability to do the work of a HIGH VOLTAGE ELECTRICIAN without normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of technical practices in order to plan, layout, and complete maintenance or repair work needed for high voltage equipment and lines; and of high voltage electrical equipment and distribution lines such as transformers, switches, circuit breakers, recording instruments, control systems, series and parallel, circuits, line loading, line losses. 2. Knowledge of electrical and electronic theory, instruments used in shop, and trade practices; and of troubleshooting and locating defects and trouble spots. 3. Knowledge of safety regulations, procedures, and practices. 4. Skill in using and maintaining electrical tools and test equipment such as oscillators, phase sticks and rotation meters, digital test equipment, fault finding equipment, ampmeters, voltmeters, meggers, graphic recorders, dressing tools, wire tongs, wire tong supports, insulated tension links, tie sticks, and insulated hoods/covers and tools. 5. Ability to use electrical drawings, blueprints, circuit diagrams, and electronic schematics. 6. Ability to install, modify, test, repair, troubleshoot, and maintain high voltage electric power-controlling equipment and/or distribution lines without more than normal supervision. Physical Effort: The employee frequently performs moderately heavy lifting, pulling, and carrying of equipment and material weighing up to 18 kilograms (40 pounds) and occasionally, lifts or pulls heavy cables and equipment weighing more than 23 kilograms (50 pounds) with the help of weight handling equipment or with assistance from other workers. Work aloft on poles, at ground level, and in ground trenches or manholes. Work requires bending, stooping, climbing, and standing for long periods. Must be able to distinguish colors and shades of colors. At times, works in awkward positions and restricted spaces where coordination of hands, legs, and body are needed to perform tasks. Working Conditions: Works indoors and outdoors. Exposed to danger from explosions of equipment and cables in manholes and vaults, as well as danger from high voltage electrical shock, burns from solder, broken bones, cuts, and bruises. Exposed to heat and noise when working in substations, to extremes of weather when working outdoors, and to unpleasant odors and wet slippery surfaces when working in manholes. Subject to electrical burns while working around high voltage electrical lines, broke bones from falls from poles, and strains from awkward work positions. Also exposed to chemicals such as insulating oil from transformers and oil switches. Use personnel protective equipment such as earplugs, safety hats, and nonconductive gloves and footwear. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Contacts

• Address Beale AFB 17855 Warren Shingle Road Beale AFB, CA 95903 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]