The primary purpose of this position is to serve as a professional architect, performing design, project programming, construction management/monitoring duties and improvement projects of real property facilities and infrastructure, including utility systems in support of a military installation. This is a developmental position with known promotion potential to the target position of 9M9GM07, Architect, GS-0808(21)-12.

Duties

Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of architecture. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of architecture to ensure overall compliance with contracted specifications, schedules, etc. Plans, programs, budgets, and executes required projects in support of assigned programs; performs work in facilities operations and maintenance (O&M) functions; provides consulting services and project coordination. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Eligible for a Cost-of-Living-Allowance (COLA) which is subject to change without notice
• Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver’s license may be required for the position.
• May act as project liaison with the Army Corps of Engineers or other design agencies as required.
• May be required to serve on A and E selection boards.
• Must be able to obtain and maintain the appropriate security clearance.

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions, Series 0808. BASIC REQUIREMENT: Click here to view occupational requirements for this position. NOTE: You must submit a copy of transcripts with your application Applicants who meet the basic requirements described in the individual occupational requirements are fully qualified for the GS-05. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE GS-07: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-05, or equivalent in other pay systems. Examples of specialized experience includes professional knowledge of architectural concepts and principles as well as the ability to apply standard architectural practices, methods, and techniques to perform, following specific instructions, relatively routine projects or a portion of a larger and more complex project; knowledge of computer aided design and drafting (CADD) programs to perform routine design and drafting assignments; familiarity with related engineering disciplines, particularly structural and mechanical. OR EDUCATION: 1 year of graduate-level education or superior academic achievement. SPECIALIZED EXPERIENCE GS-09: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-07, or equivalent in other pay systems. Examples of specialized experience includes professional knowledge of architectural concepts, principles, and practices to perform routine projects with complete responsibility, or portions of large and complex projects. Knowledge of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. Knowledge of the installation/command mission and organization. OR EDUCATION: 2 years of progressively higher-level graduate education leading to a master's degree or master's or equivalent graduate degree. SPECIALIZED EXPERIENCE GS-11: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-09, or equivalent in other pay systems. Examples of specialized experience includes professional knowledge of architectural concepts, principles, and practices applicable to a broad range of architectural, engineering, construction management, life cycle management, etc. and related assignments. Knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications. Knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings. Knowledge of and familiarity with related fields of work such as architectural, civil, electrical, mechanical, structural and environmental engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations. OR EDUCATION: 3 years of progressively higher-level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree. OR COMBINATION OF EXPERIENCE AND EDUCATION (GS-07/09/11): A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of transcripts. SPECIALIZED EXPERIENCE GS-12: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes professional knowledge of architectural concepts, principles, and practices applicable to a broad range of architectural, engineering, construction management, life cycle management, etc. and related assignments. Knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications. Knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings. Knowledge of and familiarity with related fields of work such as architectural, civil, electrical, mechanical, structural and environmental engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time--in-grade requirements to be considered eligible. One year at the GS-04 level is required to meet the time-in-grade requirements for the GS-05 level. One year at the GS-05 level is required to meet the time-in-grade requirements for the GS-07 level. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-09 level. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-11 level. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs) GS-808-05/07: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Professional knowledge of architectural concepts and principles and standard engineering practices, methods, and techniques to perform, following specific instructions, routine projects or minor phases of a larger and more complex project; and knowledge of computer aided design and drafting (CADD) programs to perform routine design and drafting assignments. 2. Skill in preparing graphs, curves, or tables. 3. Ability to search technical reports, manufacturers' catalogs, and other guidelines to obtain information. 4. Ability to use relevant software programs and use computer aided design and drafting programs (CADD). 5. Ability to work cooperatively as a team member in the design of real property facilities. 6. Ability to make calculations applying standard formulas, prepare graphs, curves, or tables, and record factual data in tests and observation studies. KNOWLEDGE, SKILLS AND ABILITIES (KSAs) GS-0808-09/11/12: CONTINUE ON EDUCATION PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

KNOWLEDGE, SKILLS AND ABILITIES (KSAs) GS-0808-9: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Professional knowledge of architectural concepts, principles, and practices and familiarity with other architectural disciplines and engineering to perform routine projects with complete responsibility, or portions of large and complex projects; and of architectural and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations.

2. Knowledge of standard contracting regulations, practices, and procedures.

3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions.

4. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders.

5. Ability to analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.

6. Ability to plan and organize work and coordinate with other architectural disciplines and engineers; and to communicate effectively both orally and in writing and maintain good working relations.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs) GS-0808-11/12: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Professional knowledge of architectural concepts, principles, and practices and familiarity with engineering disciplines.

2. Knowledge of a broad range of architectural standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; of environmental principles, practices, procedures, laws, regulations, and current legislative issues; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds.

3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions, and knowledge of program planning and budgeting cycles, financial control and budget systems and management.

4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings; and technique / skill in drafting sufficient to convey design concepts and ideas and formulate working drawings.

5. Ability to plan, conduct and record site/facilities surveys and inspection; to analyze, interpret, and apply results, rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.

6. Ability to plan and organize work and coordinate with other architects and engineering disciplines; and communicate effectively both orally and in writing and maintain good working relationships.

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address JB Elmendorf-Richardson 8517 20th Street Suite 203 JB Elmendorf-Richardson, AK 99506 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]