THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Tools And Parts Attendant (Title 32) (Permanent), Position Description Number D0918000 and is part of the VA AASF, National Guard.

Duties

As a Tools And Parts Attendant (Title 32), WG-6904-06, you will perform the below duties: Identifies user's tools, parts and equipment requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or are in need of repair. Recommends possible substitute or interchangeable items. Sets up shifts and maintains storage locations. Determines methods of storage, identification and stock location considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received stored, and issued for a particular job. Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records. Compiles reports on adjustments of inventory, stock records, spoilage, damage, location changes, and refusal of shipment. Ensures that tools and equipment are maintained in good condition by performing visual and operating checks. May make minor repairs to tools and equipment, determine when damaged items are too costly to repair, and reports damaged or worn-out equipment to superiors. Determines stock replenishment levels for centrally controlled supplies within funding limitations. Assures that supplies and monies are not wasted through excess accumulation and that items are on hand in sufficient quantities and at the time required. In addition to established guides and formulas, determines quantities required and timely stock replenishment. Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available. Searches for identifying or management data on items of supply. Compares data listed on documents with reference sources such as federal catalogs, stock lists, or other publications. Receives requests needing additional information and compares with reference sources. Searches for stock number, prices, descriptions, and sources of supply. Traces part number or type number to identify equipment/item manufacturer. Reviews supply transactions or provide customer service for urgent critical shortage items. Codes and classifies requisitions, shipping orders, and other documents. Refers requests to other sources of supply or an inventory control point when stock is unavailable and/or cannot be shipped. Establishes procedures, management of calibration, and testing of Test Measurement and Diagnostic Equipment (TMDE). Establishes procedures, manages, implements and monitors tool room operations. This includes accounting for, issuing and replacing tools. May assist with processing of hazardous materials by inspecting, receiving, sorting, accounting and classifying hazardous materials such as explosives, toxic chemicals, flammables, gas cylinders, radioactive material and hazardous waste. Performs other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• This position is located at a bargaining unit and eligible for union representation through Chapter 59 of the Association of Civilian Technicians,

Qualifications

NOTE:Qualifications are based on breadth/level of experience. In addition to describing duties performed, applicants must provide the exact dates of each period of employment (from MM/DD/YY to MM/DD/YY) and the number of hours worked per week if part time. As qualification determinations cannot be made when resumes do not include the required information, failure to provide this information may result in disqualification. Applicants are encouraged to use the USAJOBS Resume Builder to develop their federal resume. WHO CAN APPLY: GROUP I - All qualified Male/Female Enlisted Personnel (E1/PV1 - E5/SGT) currently employed (permanent) in the Virginia Air National Guard Military Technician Program. GROUP II - All qualified Virginia Army National Guard Male/Female Enlisted Personnel (E1/PV1 - E5/SGT), regardless of employment status (Traditional, Military Technician or AGR). To be considered as a Group II applicant, proof of appointment/enlistment in the Virginia National Guard must be attached if the appointment/enlistment occurred within 60 days prior to, or during, the advertisement period. GROUP III - Individuals eligible for membership in the Virginia Army National Guard. Military Grades: Enlisted Personnel (E1/PV1 - E5/SGT) GENERAL EXPERIENCE: Applicant must have experience determining, identifying and selecting for issue items described by users in terms of their intended usage; recommending possible substitutes and interchangeable items; determining work sequences, methods, procedures, and techniques for setting up and shifting storage locations and determining when tools and equipment should be routed to appropriate shops for test, repair or calibration. SPECIALIZED EXPERIENCE: Applicant must have at least 6 months of specialized experience, equivalent to at least the WG-05 level, or equivalent pay band in other pay systems in the Federal government. This experience may also have been obtained in the private sector but must demonstrate that it is comparable to the WG grade indicated. This experience must include activities such as: Experience identifying user's tools, parts and equipment requirements and requisitions stock as needed. Experience preparing periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records. Experience ensuring that tools and equipment are maintained in good condition by performing visual and operating checks. Experience determining stock replenishment levels for centrally controlled supplies within funding limitations.

Contacts

• Address VA AASF 700 Portugee Rd Sandston, VA 23150 US
• Name: VaARNG Tech Jobs HRO
• Phone: 000000000
• Email: [email protected]