About the Position: Position is with the Louisville, VAMC with duty station Louisville, Kentucky.

Duties

Final responsibility for technical accuracy of telecommunication/cybersecurity and data communication infrastructure features of the design. Provide engineering expertise and guidance to key operating officials and counterparts at the District, USACE, other military installations, government agencies, and private interests. Coordinate with teams during preparation of design studies, assessments, contract drawings, analysis, design documentation reports, design calculations, technical spec provisions and labor/material estimates of large and complex projects/equipment. Review telecommunication/cybersecurity portions of contractors/manufacturers shop drawings to evaluate the adequacy and practicability of the equipment or system design in conformance with contract requirements. Make field trips to construction or manufacturing sites to perform inspections and testing to determine contract compliance and quality. Provide expert technical guidance to District personnel on interpretation and applicability of codes, standards, regulations, design criteria, and other material in the area of telecommunication/cybersecurity and data communication infrastructure.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Position requires 10% TDY.
• Certification as a Registered Communications Distribution Designer (RCDD) must be obtained within 1 year of being hired.
• Incumbent must have and maintain a state driver's license.
• Incumbent of this position must be a registered Professional Engineer (MUST UPLOAD COPY OF LICENSE/CERTIFICATE).

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Education Requirement for Engineer: Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic education requirement above, to qualify for this position you must also meet the qualification requirements listed below: To qualify at the GS-13 grade level, you must have: One year of specialized experience which includes experience as a Registered Communications Distribution Designer (RCDD) with responsibilities in a wide range of electrical and telecommunications engineering matters. Responsible for applying knowledge of telecommunication and low voltage systems to District projects. Experience in preparing construction plans, or specifications for telecommunication and appurtenant design features. Experience in coordinating with other designers to resolve conflicts or delays. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). You will be evaluated on the basis of your level of competency in the following areas: Electronics EngineeringOral CommunicationTeamworkTechnical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RE-W2SM02 US ARMY ENGINEER DISTRICT-LOUISVILLE DO NOT MAIL Louisville, KY 40202 US
• Name: Army Applicant Help Desk