The primary purpose of this position is to function as a Mechanical Engineer serving in a developmental capacity, performs assignments designed to orient the employee in the application of academic theories and basic principles to mechanical engineering assignments. The full performance (target) and outplacement grade for this position is GS-12; Incumbent must meet all regulatory training requirements prior to promotion to the target grade.

Duties

GS-0830-07 Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer. Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work. Assists in coordinating projects with engineers in other disciplines or with architects. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. GS-0830-09 Participates in the evaluation of programs and development of plans for new construction, renovation, and improvements of real property facilities, including utility systems, utilizing a professional knowledge of mechanical engineering. Coordinates projects with engineers in other disciplines or with architects. Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete. In conjunction with the primary duty of programming/base development, on a less frequent basis performs work in the construction management, design, and/or operations and maintenance (O&M) functions. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. GS-0830-11 Monitors and manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of mechanical engineering and knowledge of other engineering disciplines to ensure overall compliance with contracted specifications, schedules, etc. Assists in planning and design process for new construction, renovations, and improvement projects for real property facilities and utility systems utilizing a professional knowledge of mechanical engineering. Evaluates/recommends programs and development plans and advocates for project requirements; performs work in facilities operations and maintenance (O&M) functions. Provides consulting services and project coordination; collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. GS-0830-12 Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of mechanical engineering. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of mechanical engineering and knowledge of other engineering disciplines to ensure overall compliance with contracted specifications, schedules, etc. Plans, programs, budgets, and executes required projects in support of assigned programs; performs work in facilities operations and maintenance (O&M) functions; provides consulting services and project coordination. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Leave accrual may be authorized upon request
• Eligible for a Cost-of-Living-Allowance (COLA) which is subject to change without notice
• Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position.
• May act as project liaison with the Army Corps of Engineers or other design agencies as required.
• May be required to serve on A and E selection boards.
• The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. (Cont'd)
• The selectee will have up to 24 months to meet the applicable mandatory experience, education, and training requirements.
• Must be able to obtain and maintain a SECRET security clearance.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. (Cont'd)
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions, Series 0830. BASIC REQUIREMENT: Individual Occupational Requirements for All Professional Engineering Positions 0800 In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-07 SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-05, or equivalent in other pay systems. Examples of specialized experience includes knowledge of mechanical engineering concepts and principles as well as the ability to apply standard mechanical engineering practices, methods, and techniques to perform, following specific instructions, relatively routine projects or on a portion of a larger and more complex project. Knowledge of computer aided design and drafting (CADD) programs to perform routine design and drafting assignments. Familiarity with related engineering disciplines, particularly structural and electrical. OR Education: Successful completion of 1 year of graduate-level education or superior academic achievement NOTE: You must submit a copy of Transcripts. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts. GS-09 SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-07, or equivalent in other pay systems. Examples of specialized experience includes knowledges of mechanical engineering concepts, principles, and practices and familiarity with other engineering disciplines and architecture to perform routine projects with complete responsibility, or portions of large and complex projects. Knowledge of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. Knowledge of the installation/command mission and organization. OR Education: Successful completion of 2 years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree NOTE: You must submit a copy of transcripts. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of transcripts. GS-11 SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-09, or equivalent in other pay systems. Examples of specialized experience includes knowledges and abilities applicable to a wide range of mechanical engineering duties; ability to modify standard practices and adapt equipment or techniques to solve a variety of problems; ability to adapt precedents or make significant departures from previous approaches to similar projects in order to provide for the specialized requirements of some projects; and ability to apply the standard practices of related engineering disciplines and architecture as they relate to engineering design. Broad understanding of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. OR Education: Successful completion of 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree NOTE: You must submit a copy of transcripts. GS-12 SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes knowledge of mechanical engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments. Knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications. Knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings. Knowledge of and familiarity with related fields of work such as architectural, electrical, mechanical, structural, environmental and civil engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-05 level is required to meet the time-in-grade requirements for the GS-07 level. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-09 level. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-11 level. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. See Education Section for KSAs PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

GS-07 KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Professional knowledge of mechanical engineering concepts and principles and standard engineering practices, methods, and techniques to perform, following specific instructions, routine projects or minor phases of a larger and more complex project; and knowledge of computer aided design and drafting (CADD) programs to perform routine design and drafting assignments.

2. Skill in preparing graphs, curves, or tables.

3. Ability to search technical reports, manufacturers' catalogs, and other guidelines to obtain information.

4. Ability to use relevant software programs and use computer aided design and drafting programs (CADD).

5. Ability to work cooperatively as a team member in the design of mechanical systems.

6. Ability to make calculations applying standard formulas; and record factual data in tests and observation studies.

GS-09 KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Professional knowledge of mechanical engineering concepts, principles, and practices and familiarity with other engineering disciplines and architecture to perform routine projects with complete responsibility, or portions of large and complex projects.

2. Knowledge of program planning and budgeting cycles, financial control and budget systems, and management; work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds; and health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders.

3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions.

4. Ability to analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.

5. Ability to plan, conduct, and record site/facility surveys and inspections.

6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; communicate effectively, both orally and in writing; and maintain good working relations.

GS-11/12 KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

1. Professional knowledge of mechanical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines.

2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements; of environmental principles, laws, and regulations; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds.

3. Knowledge of automated data processing concepts, systems capabilities; and knowledge of program planning and budgeting cycles, financial control and budget systems and management.

4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings sufficient to convey design concepts and ideas and formulate working drawings.

5. Ability to plan, conduct and record site/facilities surveys and inspection; to document, analyze, interpret, and apply results, and procedures in a variety of situations and recommend timely and economical solutions.

6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships.

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address Eielson AFB 354 Broadway Street Suite 139 Eielson AFB, AK 99702 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]