You will serve as a ELECTRICIAN in the Waterfront Services Division of TRIDENT REFIT FACILITY, BANGOR.

Duties

You will provide temporary electrical, fluid and ventilation systems services to Trident submarines and other US Navy ships moored or docked at TRF Bangor, to shore-side facilities, to other TRF shops and to other locations as assigned. You will connect temporary service equipment such as: Hydro blasters, welding equipment, media blast equipment, painting equipment, high-pressure air compressors (HPACs), and temporary structures. You will design, construct, maintain, install, groom, uninstall, inspect, troubleshoot, repair and stow any equipment, service or system in the Temporary Service Shop area of responsibility, as assigned. You will stand watch over and operate equipment to flood and dewater the drydock and to deballast and ballast the caisson. You will accurately and correctly make all required equipment operating log entries including run times, electrical current flow, pressures, flowrates, etc. You will operate systems such as: caisson ballasting and deballasting, artesian pressure relief, seismic monitoring, floor drainage, saltwater leakage, storm drainage, drydock flooding, drydock superflooding, drydock dewatering. You will design, manufacture, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble electrical equipment such as: cable lugs, plugs, splices, amphenols and receptacles, and transformers. You will design, manufacture, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble electrical equipment such as: load centers, switch cans, rectifiers, switchboards, and circuit breakers. You will design, manufacture, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble electrical equipment such as: lighting systems, tank heaters, ventilation blowers, and fire alarm systems. You will design, manufacture, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble electrical equipment such as: automatic transfer switches, and telephone cables. Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: ASW cooling hoses and flanges, SOD hoses and flanges. Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: CHT hoses and flanges, and firefighting water systems Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: breathing air systems, industrial tool air systems. Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: ventilation systems, pressure regulators, and flowmeters. Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: valve assemblies, and check valves. Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: freeze protection bleeder valves, and submersible pumps. Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: diesel seawater (DSW) hoses and fittings. Design, manufacture, layout, cut, bend, assemble, inspect, service, clean, test, maintain, troubleshoot, disassemble, repair, and reassemble piping, hose and ventilation equipment such as: sonar dome fill filters, hoses and fittings.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This is a bargaining unit position.
• You will be required to obtain and maintain qualification as Waterfront Services Craftsman.
• You will be required to obtain and maintain a Command Board Certification as Drydock Pumproom and Caisson Operator.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

This job does not have an education qualification requirement.

Contacts

• Address TRIDENT REFIT FACILITY, BANGOR 7000 Finback Circle Silverdale, WA 98315 US
• Name: Department of Navy EIC
• Email: [email protected]