Over 1 Million Paying Vacancies Available. Discover Your Dream Vacancy with Us!

Are you looking for a Interdisciplinary? We suggest you consider a direct vacancy at U.S. Army Corps of Engineers in Littleton. The page displays the terms, salary level, and employer contacts U.S. Army Corps of Engineers person

Job opening: Interdisciplinary

Salary: $86 962 - 125 685 per year
Relocation: YES
City: Littleton
Published at: May 03 2024
Employment Type: Full-time
About the Position: This is an Interdisciplinary, GS-12 position with the U.S. Army Corps of Engineers, Northwestern Division (NWD), Omaha District, Operations Division.

Duties

Evaluate all levels and types of Department of the Army (DA) Section 404 of the Clean Water Act and Section 10 of the Rivers and Harbors Act permit application, compliance, and/or enforcement cases. Develop and manage general permits (GPs). Develop procedures to implement directives from higher authority. Serve as the District representative on groups and task forces with missions of interest to the District and/or the regulatory program. Complete assignments related to special regulatory initiatives directed toward effective, efficient, and consistent application of the regulatory program.

Requirements

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Incumbent may be required to travel/perform Temporary Duty (TDY) up to 25%.
  • The position requires the incumbent to possess and maintain a valid State-Issued Driver's License.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesDomestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Regulatory Project Manager/Environmental Resources Specialist (0401 series): A. Degree: Bachelor's degree (or higher degree) in biological sciences, agriculture, natural resource management, chemistry, or related disciplines appropriate to the position. OR B. Combination of Education and Experience: Courses equivalent to a major, as shown in A above, plus appropriate experience or additional education. Basic Requirement for General/Civil/Environmental Engineer (0801 / 0810 / 0819 series): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Physical Scientist (1301 series): A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes the following: 1.) Evaluate permit applications for compliance. 2.) Develop and manage general permits AND 3.) Develop procedures to implement programmatic initiatives. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). You will be evaluated on the basis of your level of competency in the following areas: ClericalCustomer ServiceManages and Organizes InformationWritten Communication Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

  • Address RH-W2SJ07 USARMY ENGINEER DISTRICT-OMAHA DO NOT MAIL Omaha, NE 68102 US
  • Name: Army Applicant Help Desk

Similar vacancies

Interdisciplinary Mar 22 2024
$86 962 - 125 685

Evaluate all levels and types of Department of the Army (DA) permit application, compliance, and/or enforcement cases. Develop and manage general permits (G...

Interdisciplinary Sep 28 2023
$82 830 - 119 820

Evaluate all levels and types of Department of the Army (DA) permit application, compliance, and/or enforcement cases. Develop and manage general permits (...

Natural Resource Specialist Jan 09 2024
$54 505 - 104 861

Develops Natural Resource concept plans for improvements in operations and efficiency. Acts as the primary advisor to the Operations Project Manager concern...

Interdisciplinary Dec 13 2023
$51 726 - 99 513

Assist in the development of general permits. Assist in the development of procedures to implement directives from higher authority. ...