About the Position: he incumbent would serve as the supervisor of the Hydrology and Hydraulics Section, responsible for the planning, coordinating, assigning, directing, and reviewing the work of professional and non-professional employees engaged in hydrology and hydraulic engineering and other factors of water resources. This position is located with the Engineering and Construction Division, Geotechnical and Water Resources Branch, in Pittsburgh, PA.

Duties

Oversees the main Hydrology and Hydraulic missions including flood risk management, navigation, water supply, hydropower, stream bank erosion, sedimentation projects, and water control. Manages a staff of multi-disciplined professionals by planning, coordinating, assigning, directing, mentoring, and reviewing work in matters pertaining to water resources including hydrology and hydraulics. Selects employees and provides for training and development. Directs the preparation of scopes of work, project time and cost estimates, and the hydrologic and hydraulic planning, design or evaluations of studies. Directs engineering and design function to include design of the principal components of multi-purpose dams and navigation projects, channel improvement projects, erosion prevention projects, and other environmental and flood control features. Provides professional engineering expertise in hydrology and hydraulics aspects of water resources to Branch and District leadership. Conducts QA/QC reviews of above referenced work and AE contract product deliverables. Coordinates and reviews work in progress, utilizing knowledge of automated systems and a variety of water resources and engineering related software.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires a Professional Engineers License. (NOTE: A copy must be submitted with your application package.)
• As a supervisory position, a one-year supervisory probationary period is required unless already previously completed.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Defense Civilian Intelligence Personnel System (DCIPS) Interchange AgreementInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPeople with Disabilities, Schedule APriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the Basic Education and Specialized Experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Supervisory Civil Engineer (Hydraulics): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: Independently initiates, executes, and completes hydrologic and hydraulic engineering studies related to the analysis or design of dam safety, flood risk management, stream bank protection, aquatic ecosystem restoration, navigation projects, or water control structures; conducts hydrologic studies of watersheds for streams and large water bodies using HEC_HMS or other hydrologic models; hydraulic studies of streams, rivers, reservoirs, and large water bodies using HEC-RAS, Flow-3D, or similar routing models; modeling of reservoirs systems using HEC-ResSim or similar models; hydraulic design of structures; ice engineering and management; performs duties of Project Engineer or Technical Lead on Project Delivery Teams with engineers and scientists from other branches of Engineering , Construction, and Planning; reviews hydrologic and hydraulic engineering studies and design performed by other engineers in the Section as well as A-E firms under contract or review by the District and other USACE entities as well as coordinates with local, state and federal agencies and communications with the public. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Human Resources ManagementHydraulic EngineeringHydrologyOral CommunicationTechnical CompetenceWritten Communication Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address RE-W2SM04 US ARMY ENGINEER DISTRICT-PITTSBURGH DO NOT MAIL Pittsburgh, PA 15222 US
• Name: Army Applicant Help Desk