This National Guard position is for a SURFACE MAINTENANCE MECHANIC (TITLE 32), Position Description Number D1195000 and is part of the OR CSMS 1, National Guard.

Duties

As a SURFACE MAINTENANCE MECHANIC (TITLE 32), WG-5801-11, this position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to troubleshoot, repair, maintain, inspect, and/or overhaul a variety of complex combat, tactical, commercial, and special purpose vehicles and equipment having complicated mechanical and non-mechanical systems with a variety of interconnected systems. Provides technical guidance and specialized team leadership to lower grade employees. (1) Performs maintenance, troubleshooting, and major repair on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, bulldozers, power shovels, tanks, tracked combat vehicles, all terrain vehicles, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and/or overhauls, as a regular and recurring duty, a variety of the mechanically complex major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Makes repairs and modifications to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc., for use or placement in systems for which they were not specifically designed. Improvises work when standard procedures do not apply. (2) Troubleshoots equipment with a variety of the mechanically complex major systems and diagnoses difficult performance problems and the cause of mechanical failures by means of visual and auditory checks, uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of specialized original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary. (3) Removes and disassembles engines and complex major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures, and improvises repair techniques when standard procedures are not available. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. Repairs equipment with a variety of interconnected systems to include state of the art electrical and electronic, fuel injection, interconnected gear reduction, multiple engine, and similarly complex systems. Improvises, substitutes, or alters components or parts to fit into systems for which the items were not specially designed or finds other ways to correct defects when existing methods and procedures do not give desired results. (4) Independently performs repairs and maintenance functions with little or no supervision in remote locations. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work on interconnected complex systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." (5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. (6) Performs other duties as assigned. *The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialist at the bottom of the announcement.

Requirements

• National Guard Membership is required.
• Males born after 31 December 1959 must be registered for Selective Service.
• Participation in direct deposit is mandatory.
• U.S. citizenship is required.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
• Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
• Federal employment suitability required and determined by a background investigation before appointment to position.
• May be required to successfully complete a probationary period.
• Must have a valid driver's license.
• Must be able to obtain/maintain the necessary security clearance for the position.
• Compatible Military MOS Assignments: Enlisted- 12, 13, 14, 19, 25, 88, 91, 92, 94. Warrant- 12, 13, 14, 19, 25, 91, 92, 94, 882A.
• Military Grades: Enlisted members and Warrant Officers.
• Incumbent of this position may be required to participate in a Medical Surveillance Program to evaluate exposure to potentially harmful physical and/or chemical agents. This may require pre-employment and yearly physical examinations.

Qualifications

Areas of Consideration: Area 1 - Current permanent and indefinite T32 technicians of the Oregon ARNG. Area 2 - Current permanent and indefinite T5 employees of the Oregon ARNG. Area 3 - Current service members in the Oregon ARNG. GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work. WG-11 - Must have at least 18 months experience or training leading to an extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems. Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs.

Education

This job does not have an education qualification requirement.

Contacts

• Address OR CSMS 1 15300 SE Minuteman Way BLDG 6480 Clackamas, OR 97015 US
• Name: Emma Prosser
• Phone: (971) 355-3308
• Email: [email protected]