About the Position: You will serve as Deputy to the Chief, Engineering and Construction Division with responsibility to fully participate with the Division Chief in the management and long-range planning of the engineering functions of the Division. The Engineering and Construction Division is composed of engineering and construction functions working together in support of the District's Civil Works Program and significant support to other districts, and other Federal and non-Federal agencies.

Duties

Serve as Deputy to the Chief, Engineering and Construction Division with responsibility to fully participate with Division Chief in the management and long-range planning of engineering functions. Act as consultant and advisor to the District Engineer and Chiefs of other technical elements on all engineering matters and represents the Division Chief at conferences. Make the initial division level review of programs, technical reports, studies, plans specification, designs, estimates, and correspondence submitted by subordinates to determine conformity and consistency with policy and procedures. Manage construction, engineering and design activities responsible for water resource management within the district boundaries through subordinate organizational elements. Directly supervises subordinate responsible for overall administrative program policy and consistency in the Division. Exercise position management responsibilities, assuring subordinates job descriptions are current and accurate.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires you to submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
• Professional registration is required for this position: Professional Engineer (PE), Professional Geologist (PG), Registered Architect (RA) or Professional Land Surveyor (PLS). YOU MUST SUBMIT A COPY OF YOUR PE or PG LICENSE/REGISTRATION.
• You may be required to have a 1 year probationary period for supervisor.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference Eligible In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Professional registration is required for this position: Professional Engineer (PE), Professional Geologist (PG), Registered Architect (RA) or Professional Land Surveyor (PLS). (Note: You must include a copy of your current (not just the initial Registration or certificate) Professional Engineer or Architect License/Registration showing the expiration date with your application package. Failure to include this document will result in an incomplete application and you will be given no further consideration. Basic Requirement for Architecture Degree: Bachelor's degree (or higher) in architecture, or a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. (Note: You must attach a copy of your transcripts.) OR Combination of education and experience: Have a combination of education and experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. Have a degree in architectural engineering which provided the knowledge, skills, and abilities substantially equivalent to those provided in the courses specified above. (Note: You must attach a copy of your transcripts.) OR Have a combination of education and experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. Have one year of experience working in an architect's office or in architectural work, which provided me with a thorough knowledge of the fundamental principles and theories of professional architecture, for each year short of graduation from a program of study in architecture. In the absence of college courses, I have five years of such experience. (Note: You must attach a copy of your transcripts.) Basic Requirement for Geology: Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography. (Note: You must attach a copy of your transcripts.) OR Combination of education and experience: Have a combination of education and experience which includes course work as shown above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not fulltime professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.) (Note: You must attach a copy of your transcripts.) In addition to meeting the basic requirement above and in the education section to qualify for this position you must also meet the qualification requirements listed below: To qualify at the GS-14 grade level, you must have: Specialized Experience: One year of specialized experience which includes planning, managing, and coordinating work for a team of both professional and technical, administrative, and clerical employees; providing expert knowledge, experience, and guidance to Dam Safety and Navigation Engineering designs; establishing and enforcing technical policies and guidance used in the design of Civil Works projects; developing, monitoring, and managing the annual organizational budgets; providing leadership and guidance to technical leads and other technical support personnel. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13) For this job at the GS-14 grade level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Administration and ManagementOral CommunicationOrganizational DevelopmentTechnical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13). To be referred, applicants must meet applicable time-in-grade and specialized experience requirements within 30 calendar days after the closing date of the announcement.

Education

Basic Requirement for Land Surveyor
Degree: Bachelor's degree (or higher degree) in land surveying; or civil engineering with a surveying option/emphasis. My civil engineering major included at least 6 semester hours of surveying, 3 semester hours of land law, and 21 additional semester hours in any combination of the following: surveying, photogrammetry, geodetic surveying, geodesy, route surveying, remote sensing, cartography, survey astronomy, land information systems, computer-aided mapping, aerial photo interpretation, and survey analysis and adjustments. (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: Have a combination of education and experience which includes courses equivalent to a major in land surveying or civil engineering, as described above plus appropriate experience or additional education. (Note: You must attach a copy of your transcripts.)
OR
Have a current registration as a land surveyor in a State, territory, or the District of Columbia obtained by written examination under conditions outlined in the National Council of Engineering Examiners (NCEE) Unified Model Law for Registration of Surveyors. (Note: You must attach a copy of your registration obtained based on successful completion of the written examinations.)

Basic Education Requirement - All Engineers Civil, Environmental, Mechanical and Electrical Engineer (Note: You must attach a copy of your transcripts.)
Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);
OR
(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics;
OR
Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

• Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
• Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
• Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
• Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (Note: You must attach a copy of your transcripts)

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RE-W2SM03 US ARMY ENGINEER DISTRICT-NASHVILLE DO NOT MAIL Nashville, TN 37203 US
• Name: Army Applicant Help Desk