About the Position: The incumbent will serve as a Project Engineer responsible for field supervision of all civil and military contract construction activities within the Project Office. This announcement is NOT intended for current, permanent Army employees. Current, permanent Army employees who would like to be considered for this time-limited assignment should instead apply to Announcement # CERL249734302727

Duties

Reviews design plans, specifications, and cost estimates originating in the District Office to ensure consideration of field construction conditions and reasonableness of estimated quantities, labor, and material costs. Controls construction operations through continuous observations of the construction work. Recommends changes in design, specified use of materials or construction procedures. Renders technical interpretations of the plans and specifications, usually involving controversial issues between field personnel and contractors. Negotiates changes with contractors pertaining to costs, time, and other changes in original requirements. Prepares a detailed technical analysis for all claims for District review and follow-up processing. Makes complete detailed investigations of any labor law violations, preparing a full report and assessing penalties in accordance with the applicable laws and policies. Attends pre-bid and bid opening conferences to discuss the principal construction features. Checks progress continually through review of reports and field observations and requires contractors to maintain plant and equipment in sufficient quantities and condition to ensure performance as required by the plans and specifications. Formulates and administers the safety program for the office under the policies and procedures established by higher authority. Establishes basic policies and procedures for accomplishment of the functions. Manages and administers operating budgets. Informs the contractor of their responsibilities regarding the safety and accident prevention program and establishes the necessary controls to ensure adherence to the policies, procedures, and regulations. Presents detailed data and recommendations through extensive site investigations and review of design memoranda, proposed and completed plans and specifications, and other design data and criteria.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires the incumbent to either possess or obtain Defense Acquisition Workforce Improvement Act (DAWIA) Foundational certification within 24 months of entrance-on-duty.
• This position has a Temporary Duty (TDY) requirement of up to 25% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Interagency Career Transition Assistance PlanMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Spouse Preference (MSP) EligibleReinstatement In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: (1) Maintaining overall surveillance of design-build and design-build construction projects, including: reviewing and interpreting project plans and specifications for compliance with local and specialized requirements; reviewing and enforcing safety provisions. (2) Managing complex military projects and provide support for other complex construction projects. (3) Exercise independent judgment in solving complex engineering problems. (4) Provide support for construction site with responsibility for progress of construction, design plans, costs, etc. from beginning of project to its completion. This position includes a Selective Placement Factor (skill, knowledge, ability or other worker characteristic basic to and essential for satisfactory performance of the job). Selective Placement Factors are a prerequisite to appointment and represent minimum requirements for a position. Applicants who do not meet it are ineligible for further consideration. The selective placement factors for this position are: Registration or Licensure in Professional Engineering. Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Administration and ManagementBuilding and ConstructionContracting/ProcurementEngineering and Technology Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address RL-W07404 US ARMY ENGINEER DISTRICT-MOBILE DO NOT MAIL Mobile, AL 36628 US
• Name: Army Applicant Help Desk