This is a DHA for Certain Personnel of the DoD Workforce solicitation to recruit qualified candidates to positions in the competitive service. About the Position: This is a developmental position. At the full performance GS-12 level, you will serve as a senior engineer of the Civil Design Section. Projects range from the relatively small in unimproved areas to those encompassing major portions of the district including large metropolitan areas.

Duties

At the full performance level, you will: Utilize various design software to develop plans and reports. Develop and provide support to others developing grading and drainage plans. Prepare plans and specifications for construction. Act as a liaison with local, higher, and individual authorities. Remain up-to-date with current projects as well as authorities and limitations. Assume senior level responsibility for planning and design activities related to current projects. Provide support for design projects and studies.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Temporary Travel / Business Travel is up to 10% annually.
• This is NOT a remote telework position. The duty station is Memphis, TN. There may be opportunity to telework virtually for a portion of the work week.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. This is a developmental position in Engineering & Construction Division, Design Branch and may be filled at the GS-07, GS-09, GS-11, or GS-12. If selected at the GS-07, GS-09, or GS-11 level, the target level for this assignment is a GS-12. The grade level selected will be based upon your qualifications. Non-Competitive promotion to the GS-12 may be effected provided you are sufficiently experienced, meet all requirements, and are performing the full scope of major duties. Basic Requirement for Civil Engineer: NOTE: You must provide a copy of your transcript. A. Degree: Bachelor's degree (or higher degree) in engineering. For more information, please see Education Section. OR B. Combination of Education and Experience: For more information, please see Education Section. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-07 Minimum Qualifications: Specialized Experience: One year of specialized experience which includes collaborating in developing designs and construction plans using various engineering design software; AND preparing recurring reports relating to functions and activities of the unit. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering. (Note: You must attach a copy of your transcripts.) OR Superior Academic Achievement: In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).(Note: You must attach a copy of your transcripts.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. GS-09 Minimum Qualifications: Specialized Experience: One year of specialized experience which includes collaborating in developing designs and construction plans using various engineering design software; aiding in developing communication with other government agencies and local and private interests; AND preparing recurring reports relating to functions and activities of the unit. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: General Engineering; Mechanical Engineering; Civil Engineering; and Electrical Engineering. (Note: You must attach a copy of your transcripts.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. GS-11 Minimum Qualifications: Specialized Experience: One year of specialized experience which includes coordinating with team members to provide support for design projects and and studies; using various software to develop plans and reports for projects; assisting in the development of grading and drainage plans; assisting in the preparation of plans and specifications for construction; and acting as a liaison with local, higher, and individual authorities. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Civil Engineering. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. GS-12 Minimum Qualification: Specialized Experience: One year of specialized experience which includes coordinating with and providing guidance to team members during all phases of projects; development of grading and drainage plans; preparation of plans and specifications for construction; and acting as a liaison with local, higher, and individual authorities. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For the GS-12, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

Basic Requirement for Civil Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not allinclusive.)

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address RG-W2R901 US ARMY ENGINEER DISTRICT-MEMPHIS DO NOT MAIL Memphis, TN 38103 US
• Name: Army Applicant Help Desk