This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: The Savannah District Office is located in the downtown historic district (largest in the nation) where you can live and walk to work. Gorgeous weather! Savannah is located on the Georgia/South Carolina border on the Atlantic Ocean and is easily accessible by I-95 and I-16.

Duties

Plans, preforms and manages hydrographic and topographic surveys relating to maintenance and new work dredging, earth work, planning studies and disaster support. Manages survey equipment and systems to ensure calibration, operation, maintenance and repair. Serves as lead technical representative for hydrographic and topographic surveying program.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Must be able to obtain and maintain a boat operator's license for boats/vessels in accordance with ER 385-1-91 within twelve months.
• Must be able to wear protective equipment and/or clothing (e.g., PFD, hard hat, coveralls, gloves, safety footwear) as appropriate.
• Pre-employment physical examination and annual examination thereafter.
• Must possess or have the ability to acquire a valid state driver license.
• May be required to return to worksite early during post storm and other emergency situations.
• Temporary Duty Travel (TDY) up to 25% may be required.
• Involves exposure to the elements, weather varies from extreme hot to cold, walking over rough, uneven surfaces, climbing, stooping, bending, standing, and requiring use of hard hats, steel toed boots, eye protection and personal floatation devices.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. BASIC REQUIREMENT: Basic Requirements for all 801 & 810 Engineering Positions: A. Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.) OR B. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts, AND proof of registration as an Engineer Intern (EI) or Engineer in Training (EIT) or copy of your Professional Engineer (PE) license.) OR C. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts, AND proof of passing the Fundamentals of Engineering (FE) examination or other written test required for professional registration.) OR D. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.) OR E. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.) Geography Series, 0150: A. Bachelor's degree (or higher degree) in geography; or related physical or social science such as geology, meteorology, economics, statistics, sociology, anthropology, political science, history, cartography, computer science, urban studies, or planning which includes at least 24 semester hours in geography or related fields. (Note: You must attach a copy of your transcripts.) OR B. Combination of education and experience which includes courses equivalent to a major in geography, or a related field with at least 24 semester hours in geography or related fields, as shown in A above, plus appropriate experience or additional education. (Note: You must attach a copy of your transcripts.) General Physical Science Series, 1301: A. Bachelor's degree (or higher degree) in physical science, engineering, or mathematics which included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. (Note: You must attach a copy of your transcripts.) OR B. Combination of education and experience which includes courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. (Note: You must attach a copy of your transcripts.) Specialized Experience for GS-09: One year of specialized experience which includes: 1) Preparing and compiling cartographic products using GIS, surveying, geodesy, photogrammetry, remote sensing and/or CAD mapping techniques; OR 2) Reviewing and preparing real estate data products; OR 3) Assist with writing property land descriptions. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Cartography. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Education

(Basic Requirements Continued)
Cartography Series, 1370:
A. Bachelor's degree (or higher degree) in cartography; or a major that included or was supplemented by at least 30 semester hours in cartography and/or directly related science, and related mathematics. Such course work includes, but is not limited to, cartography, astronomy, geodesy, photogrammetry, physical and geological oceanography, computer science, land surveying, geophysics, physical geography, and remote sensing. The 30 semester hours must have included at least 6, but no more than 15, semester hours of college level, non-business mathematics or statistics (i.e., college level algebra, trigonometry, calculus, or scientific mathematics or statistics requiring equivalent college-level courses as prerequisites). (Note: You must attach a copy of your transcripts.)ORB. Combination of education and experience which includes courses equivalent to one of the majors, as shown in A above, that included at least 30 semester hours in cartography, and/or directly related science, and related mathematics, plus appropriate experience or additional education. (Note: You must attach a copy of your transcripts.)
OR
B. Combination of education and experience which includes courses equivalent to one of the majors, as shown in A above, that included at least 30 semester hours in cartography, and/or directly related science, and related mathematics, plus appropriate experience or additional education. (Note: You must attach a copy of your transcripts.)
Geodesy Series, 1372:A. Bachelor's degree (or higher degree) in geodesy, or a degree that included 30 semester hours in any combination of geodesy, mathematics, physics, astronomy, engineering science, surveying, geodetic surveying, photogrammetry, or geophysics. The course work must have included differential and integral calculus. (Note: You must attach a copy of your transcripts.)
OR
B. Combination of education and experience which includes course work as shown in A above, plus appropriate experience or additional education. (Note: You must attach a copy of your transcripts.)
Land Surveying Series, 1373:
A. Bachelor's degree (or higher degree) in land surveying; or civil engineering with a surveying option/emphasis. My civil engineering major included at least 6 semester hours of surveying, 3 semester hours of land law, and 21 additional semester hours in any combination of the following: surveying, photogrammetry, geodetic surveying, geodesy, route surveying, remote sensing, cartography, survey astronomy, land information systems, computer-aided mapping, aerial photo interpretation, and survey analysis and adjustments. (Note: You must attach a copy of your transcripts.)
OR
B. Combination of education and experience which includes courses equivalent to a major in land surveying or civil engineering, as described in paragraph A, plus appropriate experience or additional education. (Note: You must attach a copy of your transcripts.)ORC. Current registration as a land surveyor in a State, territory, or the District of Columbia obtained by written examination under conditions outlined in the National Council of Engineering Examiners (NCEE) Unified Model Law for Registration of Surveyors. (Note: You must attach a copy of your registration obtained based on successful completion of the written examinations.)
OR
Experience as described in A AND the education described in B. (Note: You must attach a copy of your transcripts.)

In addition to meeting the basic requirement in the link above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience for GS-11: One year of specialized experience which includes: 1) Developing maps using CADD and/or GIS software; AND 2) Writing, reviewing, and/or approving real property land descriptions; AND 3) Developing real estate maps from deeds, legal descriptions, and/or survey data. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Cartography.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
You will be evaluated on the basis of your level of competency in the following areas:

• Customer Service
• Planning and Evaluating
• Surveying

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications

Contacts

• Address RL-W2SR05 US ARMY ENGINEER DISTRICT-SAVANNAH DO NOT MAIL Savannah, GA 31402 US
• Name: Army Applicant Help Desk