You will serve as a MECHANICAL ENGINEER (PE) in the Design Division of NAVAL FACILITIES ENG COMMAND HAWAII.

Duties

You will develop complex designs and analyses utilizing advanced mechanical engineering software. You will make site investigation field trips to project sites, as required, to collect all pertinent data and refine or develop project scope by inspection of existing conditions and through meetings with sponsoring activity. You will prepare technical reports when appropriate describing problems investigated, procedures followed, results obtained, and conclusions reached. You will perform Quality Assurance reviews of drawings, specifications, calculations, cost estimates, and studies prepared by private architectural and engineering (A/E) design firms.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This is a bargaining unit position.
• You will be required to obtain and maintain a current PROFESSIONAL ENGINEER'S license.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.

Qualifications

This position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: You must currently be a licensed Professional Engineer (PE) if applying for the 0801 series. You must be a Registered Architect (RA) if applying for the 0808 series. Your license or registration must be held in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States. You MUST provide a copy of your current license/registration with your application. A copy of a wall certificate that does not have an expiration date will not serve to verify this requirement. Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Preparing engineering drawings and specifications for mechanical projects involved in the construction and/or renovation of facilities such as housing, hospitals, multi-story office buildings, steam plants, etc.; 2) Preparing technical reports that address project progress, investigations, recommendations for issues, compliance with project's budget and design, etc.; 3) Producing results of analysis in writing and consolidate findings of others and evaluate recommendations and facts; and 4) Making oral presentations of proposed designs and results of studies. **NOTE: EXPERIENCE MUST BE FULLY DOCUMENTED IN YOUR RESUME IN ORDER TO BE CONSIDERED FOR THIS POSITION.** Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address NAVAL FACILITIES ENG COMMAND HAWAII 400 Marshall Road Pearl Harbor, HI 96860 US
• Name: Department of Navy EIC
• Email: [email protected]