This recruitment is for an Interdisciplinary General Engineer/Physical Scientist position within the BIA Western Region, located in Phoenix, AZ. The incumbent will be responsible for the planning, coordination, direction and evaluation of the BIA Western Region's environmental projects. This is a Bargaining Unit position, for more information see What are bargaining units?

Duties

Manages assessment and remedial projects at BIA owned or Tribally operated Federal facilities, as well as on trust lands ensuring that these activities conform to best management practices and comply with environmental requirements. Manages environmental compliance, site assessments, and remedial activities at BIA owned facilities as well as on trust lands within the Region. Manages and implements the Environmental Management Assessment and Performance Program to assure environmental compliance and best management practices. Develops the strategic approach to the completion of BIA environmental compliance, assessment, remedial, and facility improvement projects.

Requirements

• U.S. Citizenship Required
• You will be required to have federal payments made by Direct Deposit
• You may be required to successfully complete a probationary/trial period
• A background security investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background security investigation and favorable adjudication.
• If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
• This position is subject to both pre-employment and random drug testing as a condition of employment. Applicants will not be appointed to the position if a verified positive drug test is received.
• Incumbent is required to operate a government motor vehicle, must possess a valid driver's license, and have a safe driving record within the 3 year period immediately preceding submittal of GSA Form 3607.
• This announcement will be used to fill vacancies utilizing the Direct-Hire Authority (5 CFR 337.201). Category rating, Veteran's preference, and traditional rating and ranking of applicants do NOT apply for this vacancy. Indian Preference does apply.

Qualifications

**This position may be filled in either the GS-0801 General Engineering series or the GS-1301 Physical Scientist series.** BASIC REQUIREMENTS FOR ALL GS-0800 FEDERAL ENGINEERING POSITIONS: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive. BASIC REQUIREMENTS FOR GS-1301 PHYSICAL SCIENTIST POSITIONS: A. Degree: physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR B. Combination of education and experience -- education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. MINIMUM QUALIFICATIONS: Applicants who meet the following experience requirement in addition to the Basic Requirements listed above may qualify for this GS-13 level position- 1 year of specialized experience equivalent to at least the GS-12 grade level obtained either through Federal or non-Federal employment contributing to a mission and associated initiatives and responsibilities by serving as an expert in the reduction of environmental risk and liability through the implementation of effective environmental compliance, remedial actions, and corrective actions. All qualification requirements must be met by the closing date of this announcement.

Education

If you are qualifying based on your education, you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education which shows the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: FOREIGN EDUCATION

Contacts

• Address BIA Center for Recruitment Rocky Mountain Regional BIA Center for Recruitment Rocky Mountain Regional 2021 4th Avenue North Billings, MT 59101 US
• Name: Tim Burden
• Phone: 602-241-4560
• Email: [email protected]