About the Position: You will function as a Civil Engineering Technician providing computer-aided design and drafting (CADD) support for engineers assigned to the Section, including both Civil and Military Works projects of the Nashville District.

Duties

Utilize the CADD system, assists design engineers by preparing detailed plans for such items as locks, dams, relocations of structures, utilities, road, grading, drainage, etc. Develop, maintain and shares a thorough knowledge of CADD and ProjectWise workstation hardware, operational techniques and standards. Serve as a credit card holder. Maintain flow and quality of work to assure timely accomplishment of assigned work and making day-to-day adjustments in accordance with established priorities. Purchase equipment and supplies, assuring availability of funds prior to ordering. Identify CADD work to be done and identifies operating problems.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• May be selected at any grade level with non-competitive promotion potential to target grade. Non-competitive promotion potential to the target grade based on time-in-grade requirements and demonstrated ability to perform the higher graded duties.
• Must be willing and able to travel up to 25% of the time.
• Must be able to obtain and maintain a valid state driver's license.
• Computer-Aided Drafting Technical Certificate may be required.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the OrganizationCurrent Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferOffice of Personnel Management (OPM) Interchange Agreement EligiblePriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Qualifications for GS-07 Specialized Experience: One year of specialized experience: using engineering methods, principles, requirements, work techniques, and Civil and Military Works projects; reviewing of plans and specification; using of Computer Aided Drafting and Design (CADD) systems. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-06). The OPM Qualification Standard provides the following examples: technical work in drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems. OR Education: one full year of graduate education (i.e., 18 semester hours) of graduate level education in a field directly related to the work of the position, such as: Engineering, Engineering Technology, Business, Business Administration, Natural Sciences (biology, geology, agriculture, ecology, plant and soil science, etc.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total semester hours minus 18) by 9. Add the two percentages. Qualifications for GS-08 Specialized Experience: One year ofspecialized experience:which includes: using engineering methods, principles, requirements, work techniques, and Civil and Military Works projects; reviewing of plans and specification; using of Computer Aided Drafting and Design (CADD) systems; performing computer and geometric computations. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07). The OPM Qualification Standard provides the following examples: technical work in drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems. OR Education: One and a half years of graduate level education in a field directly related to the work of the position, such as: Engineering, Engineering Technology, Business, Business Administration, or Natural Sciences (Biology, Geology, Agriculture, Ecology, Plant and Soil Science, etc.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total semester hours minus 18) by 9. Add the two percentages. Qualifications for GS-09 Specialized Experience: One year of specialized experience which includes: utilizing the CADD system, assists design engineers by preparing detailed plans for such items as locks, dams, and their appurtenances, structural steel details, structural concrete details, construction limits, quantity take-offs, relocations of structures, utilities, road, grading, drainage, etc.; using engineering methods, principles, requirements, work techniques, and Civil and Military Works projects; reviewing of plans and specification; using of Computer Aided Drafting and Design (CADD) systems; performing computer and geometric computations. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-08). The OPM Qualification Standard provides the following examples: technical work in drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems. OR Successfully completed a master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field directly related to the work of the position such as: Engineering, Engineering technology, Business, Business Administration, Natural Sciences (biology, geology, agriculture, ecology, plant and soil science etc.) (Note: You must attach a copy of your transcripts.)(Note: You must attach a copy of your transcripts.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total semester hours minus 18) by 9. Add the two percentages. You will be evaluated on the basis of your level of competency in the following areas: Computer SkillsOral CommunicationTechnical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent. GS-07: 52 weeks at GS-06 level. GS-08: 52 weeks at GS-07 level. GS-09: 52 weeks at GS-08 level.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RE-W2SM03 US ARMY ENGINEER DISTRICT-NASHVILLE DO NOT MAIL Nashville, TN 37203 US
• Name: Army Applicant Help Desk