This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This position is located in Concord, MA within the Navigation, Coastal and Environmental Planning Section of the Plan Formulation Branch in the Planning Division.

Duties

Prepare Project Management Plans that describe programs and estimates effort necessary to define and achieve study objectives. Formulate, evaluate, compare and select alternative plans of action. Coordinate the work of the project delivery team engaged in the preparation of reports and related work for water resources projects. Confer and negotiate with representatives of other Federal, State and local agencies relative to plan formulation, exchange of information, assistance and cooperation. Prepare scopes of work and government cost estimates for use as the basis for negotiating with Architect-Engineer and Professional Service firms.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• A valid state-issued driver’s license must be obtained within 30 days of employment and maintained thereafter.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for the Economist 0110 Series: A. Degree: Bachelor's degree (or higher degree) in economics that includes 21 semester hours in economics and 3 semester hours in statistics, accounting, or calculus. OR B. Combination of Education and Experience: Courses equivalent to a major in economics, as shown in A above, plus appropriate experience or additional education. Basic Requirement for Biologist 0401 series: A. Degree: Bachelor's degree (or higher degree) in biological sciences, agriculture, natural resource management, chemistry, or related disciplines appropriate to the position. OR B. Combination of Education and Experience: Courses equivalent to a major, as shown in A above, plus appropriate experience or additional education. Basic Requirement for the Civil Engineering 0810 Series: Please see education section below. Basic Requirement for the Physical Sciences 1301 Series: A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-07: Specialized Experience: One year of specialized experience includes meeting any of the following: 1) Assist in the development of scopes of work; 2) Evaluate alternative project plans ; and/or 3) Assist in drafting technical reports/documents. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-05). OR One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: such as biological sciences, agriculture, natural resource management, chemistry, or related disciplines. OR Superior Academic Achievement (SAA). In order to be creditable under this provision, SAA must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. SAA is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). OR A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. GS-09: Specialized Experience: One year of specialized experience includes any meeting two of the following:1) Assist in project plan formulation; 2) Coordinate with internal stakeholders regarding project management; and/or 3) Prepare technical documents.This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07). OR Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: biological sciences, agriculture, natural resource management, chemistry, or related disciplines applicable field(s) of study. OR A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. GS-11:Specialized Experience: One year of specialized experience includes meeting three of the following: 1) Serve as a Project Manager; 2) Conduct quality control investigations; 3) Prepare technical reports and/or 4) Apply organizational guidance/policy/regulations when coordinating project efforts. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09). OR Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: biological sciences, agriculture, natural resource management, chemistry, or related disciplines. OR A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Basic Requirement for the Civil Engineering 0810 Series:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address RD-W2SF05 US ARMY ENGINEER DISTRICT-NEW ENGLAND DO NOT MAIL Concord, MA 01742 US
• Name: Army Applicant Help Desk