Over 1 Million Paying Vacancies Available. Discover Your Dream Vacancy with Us!

Are you looking for a CIVIL ENGINEER (STRUCTURAL)? We suggest you consider a direct vacancy at Naval Facilities Engineering Systems Command in Indian Head. The page displays the terms, salary level, and employer contacts Naval Facilities Engineering Systems Command person

Job opening: CIVIL ENGINEER (STRUCTURAL)

Salary: $99 200 - 153 354 per year
Relocation: YES
Published at: Mar 15 2024
Employment Type: Full-time
This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will develop, or manage development, of complete working drawings and specifications for design bid build projects, and development of Request for Proposals (RFPs) for design build projects. You will be responsible for providing design support prior to construction award and providing the successful management of any and all post-award aspects of the construction portion for the projects assigned. You will develop new solutions for assigned facility projects where solutions from previous facility projects cannot be used, prove inefficient or not cost-effective. You will investigate and recommends corrective measures for difficulties or failures in existing structural conditions for Navy shore facilities. You will serve as part of the Source Selection Technical Evaluation Panels (TEP) supporting the acquisition process.

Requirements

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
  • You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
  • Occasional travel away from the normal duty station is required up to 15% of time.

Qualifications

This position has a Selective Placement Factor for the GS-13 grade level that will be used to screen out ineligible candidates. The selective placement factor is: Current registration as a Professional Engineer (PE) by any State in the U.S., the District of Columbia, Guam, or Puerto Rico is required. NOTE: You must submit a copy of your registration with your application to be considered for this position. GS-13- In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Preparing engineering drawings, technical specifications and studies for the structural portion of large and/or highly complex buildings (i.e., multi-story office buildings, training facilities, multi-purpose buildings, aircraft hangars, medical facilities maintenance shops, food service facilities, and/or large housing projects; 2) Resolving civil engineering construction and design issues encountered during the performance of facilities contracts; 3) Performing field investigations to verify and document existing structural conditions as a basis for the design of facility projects; 4) Managing engineering facilities projects from cradle to grave with adherence to budget, schedule and quality standards; 5) Reviewing facilities construction submittals for conformance to the requirements of structural engineering contract drawings / specification. NOTE: This information must be supported in your resume to be considered for the position. GS-12- In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Developing structural engineering design documents, (i.e. drawings, specifications & basis of designs) for new construction and renovation projects; 2) Preparing structural engineering calculations in support of structural engineering designs for new construction and renovation projects; 3) Developing design drawings via computer aided drafting software including, but not limited to Foundation Plans, Floor and Roof Framing Plans, Elevations, Sections and Details for diverse building systems and types; and 4) Prepares outlines of services, scopes of work, government construction estimates and engineering fee estimates for work to be performed under Architect-Engineer (A&E) contracts; 5) Makes field trips to Navy shore facility project sites during scoping, design, and construction to inspect existing conditions. NOTE: This information must be supported in your resume to be considered for the position. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education


Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

DEGREE AUDITS ARE NOT ACCEPTABLE.

Contacts

  • Address NAVAL FAC ENGINEERING CMD WASH 1001 North St SE 208 Washington, DC 20020 US
  • Name: NAVFAC Washington Human Resources Office
  • Phone: (202) 685-0616
  • Email: [email protected]

Map

Similar vacancies

CIVIL ENGINEER (STRUCTURAL) Jan 09 2024
$99 200 - 153 354

You will use computer aided design and drafting software (e.g., AutoCAD) to prepare concept designs, final working drawings, and engineering calculations. Y...