This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will prepare scopes of work for design and construction projects (e.g., buildings, horizontal structures). You will coordinate design and construction projects with other organizations to resolve design discrepancies and verify conformance with preestablished standards and requirements. You will review construction project parameters (e.g., integration, scope, time, cost, quality, communication, procurement, risk management) to recommend changes that will improve the overall project results. You will create architect-engineer reports to provide project status updates to higher level management.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• Registration as a Registered Architect is required for the FPL GS-13 grade.

Qualifications

At the GS-13 level this position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: This position requires the incumbent to be a registered Professional Architect in the District of Columbia, Guam, Puerto Rico, or any State in the U.S. (NOTE: You must submit a copy of your registration with your application to be considered for these positions). For the GS-13 position: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) As Senior Design Architect and technical specialist, directly responsible for executing inhouse architectural design work products and services within specified milestones and quality standards. 2) Performs all aspects of architectural design for a wide variety of installation shore facility types, including architectural programming, space planning, concept design development, sustainable design, design analyses, compliance with codes and standards, drawings, specifications, cost estimates, and other required services. 3) Leads multi-disciplinary in-house design teams. Provides day-to-day expert technical guidance and support in developing initial project documents (DD 1391, BFR, program, etc.), plans, specifications, studies, reports, and other design work products. 4) Coordinates the architectural design with the engineering disciplines for Design-Bid-Build (DBB) and Design-Build (DB) projects to ensure overall compatibility and efficiency of the site and building design. For the GS-12 position: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Designing and constructing large and/or highly complex architectural buildings designs, construction drawings, and specifications for buildings; 2) Applying Design-Bid-Build, Design-Build methods to construction projects; 3) Managing the project (i.e. scope, cost, plans specifications, reports, and design) compliance throughout the life of the project; and 4) Utilizing architectural design/analysis software to complete design drawings and specifications. Additional qualification information can be found from the following Office of Personnel Management website:https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF ANDhttps://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Specialized experience statement: 1) The incumbent provides timely, professional architectural products, services and consultation for the planning, design, construction and maintenance of facilities for the Navy, Marine Corps, and other Supported Commands, including specific projects, special projects, military construction (MILCON), demolition, maintenance, space utilization and facilities development. 2) Leads multi-disciplinary in-house design teams. Provides day-to-day expert technical guidance and support in developing initial project documents (DD 1391, BFR, program, etc.), plans, specifications, studies, reports, and other design work products. 3) Coordinates the architectural design with the engineering disciplines for Design-Bid-Build (DBB) and Design-Build (DB) projects to ensure overall compatibility and efficiency of the site and building design. 4) Participates in on-site Functional Analysis Concept Development (FACD)/design charrette to determine functional requirements and develop concept design for large, complex projects.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess:

1. Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR

2. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:
   1. Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.
   2. Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Contacts

• Address NAVAL FAC ENGINEERING CMD WASH 1001 North St SE 208 Washington, DC 20020 US
• Name: NAVFAC Washington Human Resources Office
• Phone: (202) 685-0616
• Email: [email protected]