This National Guard position is for an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, Position Description Number D2325000 / D2240P01 and is part of the OH 121 Air Refueling Wing, Ohio Air National Guard. The primary purpose of this position is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions.

Duties

As an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13, you will perform the following duties: 1) Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. 2) Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. 3) Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on aircraft avionics such as automatic flight control systems, instrument systems, communication and navigation systems, and inertial navigation systems. 4) Performs other duties as assigned. *The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D2325000 / D2240P01). https://acpol2.army.mil/fasclass/search_fs/search_fasclass.asp

Requirements

Qualifications

GENERAL EXPERIENCE: Skilled in collecting and analyzing data effectively, efficiently, and accurately. Ability to communicate clearly and effectively. Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to format and write English in reports and presentation formats. Skilled in presenting formal training presentations and briefings. Skilled in applying procedures and directives by reading and interpreting material. Skilled in training, mentoring, leading, and problem-solving. SPECIALIZED EXPERIENCE: Must have at least 12 months of work experiences. Experiences involved duties such as, inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit maintenance pods, peripherals, support equipment and associated subsystems. Knowledgeable of stations that are used to repair and maintain all avionics line-replaceable and pods. Skilled in analyzing performance results, running tests, inspecting, troubleshooting, identifying and isolating malfunctions. Experienced in how to disassemble, modify or repair and reassemble test stations or electronic circuit maintenance pods and their associated peripherals. Skills include the ability to consider the complex inter-related variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Experienced in analyzing malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Skilled in the diagnoses of circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Experiences involved isolating problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Skilled in removing and replacing components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. Experiences involved modifying and updating avionics pods, support equipment, and support software according to applicable technical publications. Skilled in analyzing program data to determine if the criteria is sufficient to provide adequate testing and troubleshooting. Experienced in the examination of recurring malfunctions and software deficiencies to determine testing voids and initiated corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Skilled in devising repair procedures based on findings and recommending program changes, procedural changes, or data corrections to correct software deficiencies. Experiences included connecting associated testing equipment to interface the test station system to the aircraft system and pod to facilitate maintenance/repair of the pod or line replaceable units from the avionics systems such as, radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Skilled in determining if failures were caused by the unit under test, the pod, the test station, or the test program. Skilled in identifying malfunctions in the unit under test, pod or the test station and isolating it to the specific component(s). Experienced in repairing and replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and reassembling and performing operational tests. Experiences included working with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Skilled in initiating technical data changes. Skilled in providing hands-on training instructions to lower-grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Experiences included the preparation and participation in various types of readiness evaluations such as, Operational Readiness Inspections, Inspector General Inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May have general knowledge in structural fire-fighting, aircraft fire, aircraft crash and rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment. Skilled in the compliance requirements concerning safety, fire, security, and housekeeping regulations. Experienced in the procedures involved with the proper storage, protection, and maintenance of all work-related material and equipment. WG12: For the WG-2610-12 ANG Dual Status Technician positions, the mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC. Experiences involved installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. WG13: For the WG-13 ANG Dual Status Technician positions, the mandatory military education requirements are the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC, along with the successful completion of at least one military professional education course program.

Education

This job does not have an education qualification requirement.

Contacts

• Address OH 121 Air Refueling Wing 7370 Minuteman Way Columbus, OH 43217 US
• Name: SHANE GAINES
• Phone: 614-492-4626
• Email: [email protected]