About the Position: This is a Lead Environmental Engineer, GS-0819-13 position with the U.S. Army Corps of Engineers, Southwestern Division, Fort Worth District, Regional Planning and Environmental Center (RPEC). RPEC has duty stations in: Fort Worth, TX; Galveston, TX; Little Rock, AR; and Tulsa, OK. Salary posted is a range for the standard RPEC duty station localities and will be adjusted to the locality of selectee's physical duty location.

Duties

Serve as Lead Environmental Engineer and subject matter expert (SME) in the Regional Planning and Environmental Center (RPEC). Responsible for execution of assigned environmental remediation/restoration projects. Serve as principal team lead/project manager and/or principle investigator in development and completion of environmental investigations, conceptual or preliminary designs, and permit applications as assigned. Provide advice and guidance addressing potential property contamination concerns, site remediation approaches, solid waste minimization (potentially including resource recovery/recycle), and permitting strategies as assigned. Serve as Project Delivery Team (PDT) member on specific projects as assigned. Conduct field investigations as required, while adhering to safety, rights of entry, and security measures as applicable. Serve as team leader for lower grade Environmental Engineers and other Technical Specialists in the Section.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires a Professional Engineering (PE) License. The PE License must be submitted at time of application to receive consideration for the position.
• This position requires you to submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for the 0819 series: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirements above, to qualify for this position you must also meet the qualifications requirements listed below: Specialized Experience: One year of specialized experience which includes: 1) conducting project management duties for environmental remediation/restoration projects; AND 2) monitoring the progress of environmental contracts to ensure activities are completed on time and within budget; AND 3) communicating with internal/external customers, stakeholders, or state/federal agencies regarding environmental investigation, design, or remediation activities. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12 or above). You will be evaluated on the basis of your level of competency in the following areas: LeadershipOral CommunicationProblem SolvingProject Management Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address RK-W07602 US ARMY ENGINEER DISTRICT FORT WORTH DO NOT MAIL Fort Worth, TX 76102 US
• Name: Army Applicant Help Desk