This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will NOT be accepted through this flyer. Interested applicants should review the "How to Apply" section of this flyer for more information on how to be considered. This flyer will be used as positions become available. There may or may not be actual vacancies filled from this flyer.

Duties

Review and interpret the requirements of plans and specifications related to Construction Projects. Analyze problems, review and interpret requirements of plans and specifications for subordinate personnel, contract representatives and other interested persons. Direct checking of construction layout work, computing quantities and checking contractors pay estimates and cost estimates to accompany contract modifications. Perform full range of contract administration for assigned contracts and orders as ACO and/or COR. Interpret agency policies, regulations, standards and procedures, and gives advice and counsel to employees on work and administrative matters. Review, evaluate, and monitor actions of subordinates exercising assigned COR authorities. Maintain liaison with using agencies to provide assistance of all kinds which will contribute to timely completion and the construction of functional and sound engineering structures. Coordinate construction operations with the using agency, contractors, representatives of the District Office, and higher echelons Initiate recruitment actions and selects employees for positions. Discuss work assignments with subordinate supervisors suggesting improvements for better coverage. Establish and enforce safety rules and regulations.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires the incumbent to obtain and maintain an Administrative Contracting Officer (ACO) $500,000 warrant.
• The incumbent is allowed 24 months from the initial start date to obtain warrant.
• The duties of this position require Travel up to approximately 25% of the time.
• This is an Army Acquisition, Technology, and Logistics (ATL) Workforce position. The employee must meet DoDI 5000.66 requirements applicable to the duties of the position. Acquisition Position: Contracting, Foundations
• Incumbent is required to submit a Confidential Financial Disclosure Report, OGE-450, (5CFR Part 2634, Subpart I Confidential Financial Disclosure Reports).
• Upon entering the position and annually, in accordance with DoD Directive 5500-7-R, Joint Ethics Regulation, dated 17-Nov-2011.
• This is a Defense Acquisition Workforce (AWF) position.
• The employee must meet the DoDI 5000.66 requirements applicable to the Career Category/Functional Area and the Career Level Certification assigned on the sequenced position Conditions of Employment data fields in the header of the PD/PRD.
• Foundational Career Level Certification or Contracting Professional Certification must be met within 3 years.
• Position requires Drug testing, the incumbent will enroll in the Department of Army Drug-Free Federal Workplace Program to include passing a urinalysis drug testing prior to appointment and passing random urinalysis drug testing thereafter.
• Position requires a Top Secret Security clearance, position sensitive is Special Sensitive High Risk.

Qualifications

DHA for Certain Competitive Service Positions Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for SUPERVISORY ARCHITECT - 0808; SUPERVISORY CIVIL ENGINEER - 0810; SUPERVISORY MECHANICAL ENGINEER - 0830: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for SUPERVISORY ARCHITECT - 0808: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Specialized Experience: In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: one year of specialized experience in the Federal Service which includes: 1) construction management (quality and scheduled management and technical issue resolution), Construction Contract Administration (scoping and negotiation of modifications, submittal review and payments) and supervisor of subordinate professional employees. Selective Placement Factor: 1) The duties of this position require a Professional Engineer or Registered Architect at entry.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications.

Contacts

• Address RD-W2SD01 US ARMY ENGINEER DISTRICT-BALTIMORE DO NOT MAIL Baltimore, MD 21203 US
• Name: Army Applicant Help Desk