This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will NOT be accepted through this flyer. Interested applicants should review the "How to Apply" section of this flyer for more information on how to be considered. This flyer will be used as positions become available. There may or may not be actual vacancies filled from this flyer.

Duties

Coordinate the review of shop drawings to determine conformance with construction plans. Makes periodic inspection visits to construction sites to determine progress of contractor operations. Provide technical assistance and advice for resolution of complex problems and serve as the Contracting Officer’s Representative. Responsible for the technical checks to obtain compliance with plans and specifications and ensure that construction work is accomplished. Serve as coach, facilitator and/or negotiator in coordinating team initiatives and in consensus building activities among team members. Monitor and report on the status and progress of work and reviewing completed work to see that the supervisor's instruction on work priorities, methods, deadlines and quality has been met.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• The duties of this position require the incumbent to possess or obtain and maintain a valid state Driver’s License.
• The duties of this position require Travel up to approximately 15% of the time.
• Position requires registration as Professional Engineer or Architect.
• This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG).
• A one-year probation to assess your ability to perform supervisory duties is required unless previously completed.
• Incumbent is required to submit a Confidential Financial Disclosure Report, OGE-450, (5CFR Part 2634, Subpart I Confidential Financial Disclosure Reports).
• Upon entering the position and annually, in accordance with DoD Directive 5500-7-R, Joint Ethics Regulation, dated 17-Nov-2011.
• This is a Defense Acquisition Workforce (AWF) position.
• The employee must meet the DoDI 5000.66 requirements applicable to the Career Category/Functional Area and the Career Level Certification assigned on the sequenced position Conditions of Employment data fields in the header of the PD/PRD.
• Foundational Career Level Certification must be met within 3 years.
• Position maintains a Secret Security Clearance.

Qualifications

DHA for Certain Competitive Service Positions Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for SUPERVISORY CIVIL ENGINEER - 0810; SUPERVISORY MECHANICAL ENGINEER - 0830; SUPERVISORY ELECTRICAL ENGINEER - 0850 : A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for SUPERVISORY ARCHITECT - 0808: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. Specialized experience: In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: one year of specialized experience equivalent to the GS-12 level in the Federal Service which includes: 1) Performing quality assurance inspections to verify workmanship and contract compliance; 2) Reviewing plans and specifications; AND 3) Directing the preparation of daily inspection reports. Selective Placement Factor: 1) Position requires registration as Professional Engineer or Architect.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications.

Contacts

• Address RD-W2SD01 US ARMY ENGINEER DISTRICT-BALTIMORE DO NOT MAIL Baltimore, MD 21203 US
• Name: Army Applicant Help Desk