The incumbent assists the area/zone or similar engineer and is responsible for providing technical guidance and in-the overall planning, design, installation, and maintenance of the engineering phases of soil and water conservation practices. This position is supervised by a District Conservationist or Engineer but always with technical guidance provided by an engineer and under the Engineering Job Approval Authority (EJAA) of the State Conservation Engineer.

Duties

Oversee the planning, design and construction of engineering practices such as water management, animal waste management, erosion control, flood control, wetland creation or restoration, and other conservation practices needing engineering guidance. Prepares designs, preliminary and final drawings and specifications on complex engineering practices Directs and performs site investigations, feasibility studies, and field construction checks for conservation practice installations. Make periodic quality reviews of notes, drawings, designs, and installations for compliance with policies, procedures, and/or specifications. Assists leadership in evaluating the effectiveness of engineering practices, technical documents, and procedures Assists leadership in determining the training needs of the field of personnel engaged in engineering work.

Requirements

• You must be a US Citizen or US National
• Males born after 12/31/1959 must be Selective Service registered or exempt
• Subject to satisfactory adjudication of background investigation and/or fingerprint check. If selected you will be sent instructions on obtaining fingerprints. Please note we are not able to reimburse any fees incurred for fingerprints.
• Successful completion of one-year trial period
• Direct Deposit: Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution
• Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit https://www.e-verify.gov/
• This position requires the incumbent to possess and maintain a valid state driver's license.

Qualifications

(NOTE: You must attach a copy of your transcripts. Failure to submit transcripts will result in an ineligible rating.) Basic Requirements: Degree in professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure--Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Boards eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test-Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses-Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements above. The courses must be fully acceptable toward meeting the requirements of an engineering program as described above. Related curriculum-Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had a least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of relate curricula are not all-inclusive.) In addition to meeting one of the Basic Requirements above, applicants must meet the following Minimum Qualification requirement in order to be considered for this position: Applicants that meet the basic education requirement qualify for the GS-5 level. Specialized Experience: To qualify for the GS-07, you must possess one year of specialized experience equivalent to the GS-05 level in the Federal service, or comparable experience not gained through federal service. For this position, specialized experience is defined as providing technical assistance and guidance in the overall planning, design, installation, and maintenance of engineering practices for soil and water conservation programs. OR Superior academic achievement in a bachelor's degree a curriculum directly related to the work of the position.. To qualify for superior academic achievement, you must have ONE of the following: (1) standing in the upper third of your college class or major subdivision at the time you apply; (2) grade point average of B (3.0 on a 4.0 scale) or its equivalent for all courses completed, either (a) at the time of application or (b) during the last 2 years of your undergraduate curriculum; (3) B+ (3.5 on a 4.0 scale) or its equivalent for all courses completed in a related discipline, either (a) at the time of application or (b) during the last 2 years of your undergraduate curriculum; OR (4) election to membership in one of the national honorary scholastic societies that meets the requirements of the Association of College Honor Society; OR Education Substitution: One full year of progressively higher level graduate education in engineering or related field; OR Combination of Education and Experience: A combination of graduate level education and specialized experience may be used to qualify for this position. GS-9 Grade Level: In addition to meeting one of the Basic Requirements above, applicants must meet the following Minimum Qualification requirement in order to be considered for this position: SpecializedExperience: To qualify for the GS-09, you must possess one year of specialized experience equivalent to the GS-07 level in the Federal service, or comparable experience not gained through federal service. For this position, specialized experience is defined as: Providing assistance in the planning, design, and construction of engineering phases of soil and water conservation practices; Conducting quality assurance reviews of planned, designed, and constructed engineering projects to recommend ways to improve the efficiency, effectiveness, and quality of products or services provided to internal and external customers; OR Education Substitution: Two full years of progressively high graduate education or Master's or equivalent graduate degree in engineering or related field; OR Combination of Education and Experience: Possess a combination of graduate-level education and experience, as described above, may be used to qualify for this position. This combination must have equipped you with the necessary knowledge and/or experience to successfully perform the duties of this position. Combinations of experience and education must total at 100%. To view the position's Qualification Requirements of the associated occupational series as outlined in the U.S. Office of Personnel Management, General Schedule Qualifications Standards. See the link below: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=0800-ndx Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

If you are relying on your education to meet qualification requirements:

You must submit a copy of your college transcripts or a list of college courses with credit hours, dates completed, and grades received to verify all education requirements (i.e. substitution of education and/or basic education requirement). If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement. You must document all requirements on every vacancy; we cannot use previous determinations as a basis for rating. If you have not yet conferred your degree or certificate, but will within 120 days of the closing date of this announcement, a letter from the school documenting current standing, degree being obtained and expected graduation date must be submitted with your application. All required information must be received by the closing date of this announcement, and non-submission of all required documents/documentation will result in non-consideration. Unofficial transcripts will be accepted. Official transcript will be required prior to entering on duty. This information must be received by the closing date of this announcement. Non-submission of these documents will result in non-consideration.

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Applicants must, therefore, only report attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation via this link. All education claimed by applicants will be verified accordingly. Important: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. Click on this link for more information.

Contacts

• Address Natural Resources Conservation Service 1400 Independence Ave SW Washington, DC 20250 US
• Name: Olu Gbolade
• Email: [email protected]