About the Position: This position is with the U. S. Army Corps of Engineers, Pittsburgh District, Engineering and Construction Division Design Branch, located in Pittsburgh, PA. Serves as a Project Engineer/Technical Manager for large multi-discipline projects, coordinates design activities with outside agencies, contractors, and other District personnel.

Duties

Performs engineering duties related to variety of structural engineering features pertinent to the new construction and/or modification of navigation locks and dams, flood control and local protection projects, seawalls, harbors, and breakwaters. Processes work in accordance with established procedures and exercises personal initiative in developing designs and completing assignments. Develops design details of structural features for structures such as miter gates, butterfly valves, reverse tainter valves, bulkheads, service bridges, determining the engineering principles that apply. Coordinates the engineering data resulting from preceding work and provides technical assistance in the preparation of preliminary designs and estimates.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• TDY may be up to 15%. (Temporary duty away from regular position location.)
• Appointment to this position is subject to a one-year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315

Qualifications

Special Notice: Please Read! If you do not meet one of the eligibility requirements under "Who May Apply", please apply against announcement CERE247877320348HWR which is open to all U.S. citizens. Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPeople with Disabilities, Schedule APriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Educational Requirement for Civil Engineer (Structural): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience One year of specialized experience which includes 1)Completing engineering work related to structural features pertinent to the new construction and/or modification of navigation locks and dams, flood control and local protection projects, and appurtenant features;2) coordinating and directing work of others in the accomplishment of project assignments, administering Architect-Engineer design work, or other work similar to that performed in this position; and 3) Preparing design documentation reports, contract drawings, plans, specifications, operation and maintenance manuals, engineering estimates, and engineering appendices for feasibility reports and more complete phases of an overall project or for large portions of major projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: DesignModeling and SimulationStructural Engineering Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

For this job at the GS-12 grade level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Contacts

• Address RE-W2SM04 US ARMY ENGINEER DISTRICT-PITTSBURGH DO NOT MAIL Pittsburgh, PA 15222 US
• Name: Army Applicant Help Desk