About the Position: Serves as the Contracting Officer's Representative (COR) in accordance with established policies, procedures and regulations. Incumbent is a construction Project Engineer, responsible for accomplishing assigned engineering duties and responsibilities on several simultaneous projects. Conducts construction management, Contract Administration and Quality Assurance activities

Duties

Responsible for providing technical supervision and administrative field control over construction performed by contractors and subcontractors. Closely monitors construction progress to assure timely progress, minimize delays and provides upward reporting to project managers. Interprets and enforces contract requirements and ensures appropriate and effective quality assurance activities are being employed. Reviews and evaluates Contractors' submittals. Makes on-site decisions regarding compliance with contract provisions and environmental harmony, and exercises engineering judgment to affect a solution between conflicting plan details or requirements which become evident as construction progresses. Conducts or participates in negotiations to reach a fair and reasonable settlement of contract time extensions and/or cost increase/decrease. Ensures modifications, finding of fact, and pro/post negotiation memorandums are prepared for review and signature by Administrative Contracting Officer or Contracting Officer in accordance with applicable regulations.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• May require a 1-year probationary period if not already met IAW with 5CFR
• Must be qualified to drive Government vehicles in accordance with Corps of Engineers Standards.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPeople with Disabilities, Schedule APriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 This Open Continuous announcement allows acceptance of applications through the closing date. The intent of this announcement is to establish a standing register of qualified candidates and refer for consideration when vacancies occur. Applications will be reviewed and referred for selection as vacancies occur within the organization. The initial cutoff for this announcement is 29 FEB 2024. Subsequent cutoffs will be as needed when vacancies occur. Your application will expire after 3 months. Thereafter you must reapply to keep your application active for this vacancy. In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience for GS-11 Grade Level: experience assisting with preparing cost estimates, change orders, and modifications, and performs developmental invoicing and scheduling assignments. Specialized Experience for GS-12 Grade Level: experience preparing cost estimates, change orders, and modifications; reviewing and evaluating progress schedules; reviewing invoices and supporting documents for processing payments; computing quantities/final quantities; and negotiating with contractors. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone-NO substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Contracting/ProcurementOral CommunicationProject ManagementTechnical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent: 52 weeks at the GS-09 to meet time in grade for GS-11. 52 weeks at the GS-11 to meet time in grade for GS-12.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RE-W2SM04 US ARMY ENGINEER DISTRICT-PITTSBURGH DO NOT MAIL Pittsburgh, PA 15222 US
• Name: Army Applicant Help Desk