This position is being filled under the Direct Hire Authority for Post-Secondary Students and Recent Graduates. THIS POSITION IS BEING FILLED AT THE GS-07, Target GS-12 LEVEL ONLY. Duties will be performed in a developmental capacity under close supervision up to the GS-12 full performance level. This position is a TERM position not to exceed 12 months. This position is temporary and may be extended up to a maximum of 4 years. This position may be made permanent without further competition.

Duties

Interpret basic design data and review completed plans and specifications to identify discrepancies or to detect omissions. Coordinate with the Project Manager and/or Design Manager to ensure they understand the effect that the project's cost has on the project's design and scope. Deliver Rough Order of Magnitude (ROM)/Programming estimates using the latest cost engineering methodologies and using appropriate estimating software such as the TRACES Parametric Cost Estimating System (PACES) and PC Cost. Deliver complete construction and services project cost estimates for construction of a wide variety of permanent type structures, using basic data derived from drawings, specifications, tentative plans, and other file materials or available sources. Serve as a cost estimator delivering work products and other outputs associated with the full range of estimating duties.

Requirements

• A trial or probationary period may be required in accordance with agency policy.
• A post-secondary student appointment expires 120 days after completion of the designated academic course of study, unless the student is selected for noncompetitive conversion.
• Post-secondary students being converted to positions covered under Administrative Careers with America (ACWA) must be assessed prior to non-competitive conversion.
• Must sign a Participant Agreement that sets forth the expectations for the program requirements.

Qualifications

Who May Apply: To be eligible for consideration you must meet the definition of Post-Secondary student or Recent Graduate as defined below: Post-Secondary Student: a person who, (1) is currently enrolled in, and in good academic standing at, a full-time program at an institution of higher education; and (2) is making satisfactory progress towards receipt of a baccalaureate or graduate degree; and (3) has completed at least one year of the program. OR Recent Graduate: a person who was awarded a degree by an institution of higher education not more than two years before the date of the appointment of the applicant. Exception: For a person who has completed a period of obligated service in a uniformed service of more than four years, the degree may be awarded by an institution of higher education not more than four years before the date of the appointment of the applicant. In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant education and experience. Additional information about transcripts is in this document. Basic Requirement for Cost Engineer, Civil Engineer, Mechanical Engineer, or Electrical Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Economist:A. Degree: Bachelor's degree (or higher degree) in economics that includes 21 semester hours in economics and 3 semester hours in statistics, accounting, or calculus. OR B. Combination of Education and Experience: Courses equivalent to a major in economics, as shown in A above, plus appropriate experience or additional education. Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS 7Specialized Experience: One year of specialized experience which includes applying various engineering techniques to assist in projects; using cost estimation through education, training and/or experience; preparing correspondence, studies, technical reports etc.; and communicating ideas with personnel associated with the work assignments.This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position. OR

Education

Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.




FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Post-secondary students being considered for initial appointments to positions leading to target positions with positive education requirements should be enrolled in directly-related degree programs in order to meet the OPM qualification requirements for the target position upon completion of their academic program.

Contacts

• Address RB-W31R30 US ARMY ENG DIV TAD MID EAST DIST DO NOT MAIL Winchester, VA 22604 US
• Name: Army Applicant Help Desk