THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Machinist, Position Description Number D1213000 and is part of the MATES, National Guard.

Duties

As a Machinist, WG-3414-11 (Title 32) (Permanent), you will perform the below duties: (1) Fabricates complex and non-routine items that require numerous intricate steps, precise measurements, unusual and compound angles, or nonstandard applications of standard equipment. Performs machining work to manufacture castings, forgings, weldments, and other fabrications. May develop and manufacture specialized tools to manufacture new parts, work rare metals or special alloys, or achieve special finishes. (2) Plans and lays out work from blueprints, sketches, drawings, or specifications. Lays out work by measuring and marking straight lines, arcs, circles, angles, and location points for setting up work pieces for drilling, tapping, turning, milling, boring, reaming, shaping, grinding, honing, and lapping. Frequently interprets or completes dimensions, tolerances, or specifications that are incomplete or incorrect. This may involve partial changes or complete redesign of items to achieve desired results. Uses a variety of measuring and marking tools, including rules, vernier calipers, micrometers (inside, outside, and depth), dial indicators, surface gauges height gauges, squares, protractors, dividers, and scribes. (3) Performs machine setups using advanced shop mathematics, and geometric and trigonometric formulas, to compute compound angles, angular indexing, hole patterns, pitch lead, and pitch diameters for various standard and non-standard threads. Determines procedures, tools, machines, equipment, and attachments to use.Occasionally performs machine work that requires new or untried procedures. Performs special setups and improvises conventional machines to perform special machining operations. This requires special knowledges of tooling, types of coolants, machine feeds, and speeds for special operations. (4) Sets up and operates most types of conventional and/or Computer Numerical Control (CNC) machine tools such as lathes; vertical and horizontal boring mills; bench, plane, or universal milling machines; shapers and planers; internal and external grinders, thread grinders; and radial drills. Grinds and sharpens tools, selects tools, jigs, and fixtures required to achieve specific dimensions, tolerances, and surface finishes. Sets up work in vises and between centers, uses chucks, standard faceplates, angle plate mountings, and collets. Uses mandrel and various other machine tool attachments such as rotary vises, dividing heads, taper attachments, magnetic checks, vertical milling heads, tapping attachments, and rotary tables. Adjusts and sets speeds and feeds of machinery and determines coolants, lubricants, and abrasives to be used, taking into consideration the characteristics of both the machinery and the materials to be worked. Operates machine tools to cut, drill, bore, tap, ream, shape, turn, mill, grind, hone, and lap items. Maintains dimensional accuracy during machining processes frequently, machining to tolerances that are difficult to attain or hold. (5) Performs precision handwork to finish, fit, and assemble machined parts. Uses various bench-mounted and hand-held powered and non-powered tools such as files, drills, reamers, and buffers. Performs heat-treating, welding, and soldering. (6) Performs other duties as assigned

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• This position is located at a bargaining unit and eligible for union representation through Chapter 102 of the Association of Civilian Technicians.

Qualifications

NOTE:Qualifications are based on breadth/level of experience. In addition to describing duties performed, applicants must provide the exact dates of each period of employment (from MM/DD/YY to MM/DD/YY) and the number of hours worked per week if part time. As qualification determinations cannot be made when resumes do not include the required information, failure to provide this information may result in disqualification. Applicants are encouraged to use the USAJOBS Resume Builder to develop their federal resume. WHO CAN APPLY: GROUP I - All qualified Male/Female Enlisted Member (E1/PV1 - E8/MSG) currently employed (permanent) in the Virginia Army National Guard Military Technician Program. GROUP II - All qualified Virginia Army National Guard Male/Female Enlisted Member (E1/PV1- E8/MSG), regardless of employment status (Traditional, Military Technician or AGR). To be considered as a Group II applicant, proof of appointment/enlistment in the Virginia National Guard must be attached if the appointment/enlistment occurred within 60 days prior to, or during, the advertisement period. Military Grades: Enlisted Member (E1/PV1 - E8/MSG) GENERAL EXPERIENCE: Applicant must have experience or training that has provided the candidate with a basic knowledge of machining processes and must have the ability to use drill presses, shapers, planers and other types of associated machine tools. SPECIALIZED EXPERIENCE: Applicant must have at least 18 months of specialized experience, equivalent to at least the WG-10 level, or equivalent pay band in other pay systems in the Federal government. This experience may also have been obtained in the private sector but must demonstrate that it is comparable to the WG grade indicated. This experience must include activities such as: Experience or training performing the full range of machining operations on most types of conventional or CNC machine tools and their various attachments. Experience or training in planning and lay out work from blueprints, worksheets and other drawings that may have missing or incorrect information. Skill in applying shop mathematics in establishing needed dimensions, such as those required for chasing threads or machining angular surfaces; locating and marking surfaces and angles to be machined. Skill in programming machining operations, setting up and operating CNC machine tools.

Contacts

• Address VA MATES Bldg 134 Blackstone, VA 23824 US
• Name: VaARNG Tech Jobs HRO
• Phone: 000000000
• Email: [email protected]