Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild integrated electronic systems, where the output of a number of sensor subsystems is integrated into a logic subsystem and the resultant used to modify the operation of the total system.

Duties

- Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates integrated ground or airborne electronics systems such as fire control, ballistic missile control, missile guidance, air traffic control, automatic test equipment, dead reckoning navigation or bombing-navigation systems. - Sets up and operates software controlled automated test equipment to run established programs in various test modes to test and troubleshoot integrated systems. - Uses and maintains hand and power tools, precision measurement tools, and test equipment, such as O-scopes, pulse generators, power supplies, resistance decades, electrostatic field meters, digital/analog multimeters, precision measurement tools and test equipment, gas leak detectors, resistivity meter, electronic control test set, explosive set, circuitry test set, ESD meter, VOM meters, micrometers, torque wrenches, soldering irons, and other trade tools and equipment. - Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. - Maintains inspections and maintenance records.

Requirements

• This position is emergency-essential. In the event of a crisis situation, the incumbent, or designated alternate, must continue to perform the Emergency-Essential duties until relieved by proper authority. The incumbent or the designated
• alternate may be required to take part in readiness exercises. This position cannot be vacated during national emergency or mobilization without seriously impairing the capability of the organization to function effectively.
• This meets the criteria of an Emergency-Essential position and requires that the incumbent, or the designated alternate, be removed from any military recall status. Employee must sign DD Form 2365 as a condition of employment.
• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• May be required to work rotating shifts or uncommon tours of duty. Subject to call back to meet emergency situations.
• Must be able to obtain and maintain a Secret Clearance to perform the work in sensitive areas.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• The physical requirements of this position as determined by the manager are: Light to moderate physical exertion is required in lifting and carrying items weighing from 10 to 40 pounds.
• And occasional objects weighing in excess of 40 pounds with the help of weight handling equipment or with assistance from other workers.
• The work requires standing, bending, and stooping for extended periods of time on concrete or composition floors. Climbing and working in high places (towers) may be required.
• The duties of this position require the employee to operate a motor vehicle. An appropriate, valid driver’s license is required.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 Electronic Equipment Installation and Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to do the work of an ELECTRONIC INTEGRATED SYSTEMS MECHANIC without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of electronic theories and practices of one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems; of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems; of such applications as radar, digital or analog computers, digital display devices, and of the technology and practices which integrate these components into a total functional system; and of mathematics including algebra and basic trigonometric functions to adapt standard function to the specific requirements of the integrated systems. 2. Knowledge of safety regulations, practices, and procedures. 3. Skill in the set up and operation of computer controlled automated test equipment (A TE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete integrated systems to recognize the function and interconnections of components, assemblies, subassemblies, and connecting cable harness; and in troubleshooting, installing, repairing, and maintaining electronic integrated systems where circuit theory must be used to understand the operation of a large number of circuits and functions, and the interaction of subsystems which create malfunctions. 4. Skill in the use of a variety of hand tools such as screwdrivers, drills, wrenches, soldering irons, and micro soldering units. 5. Ability to follow drawings for integrated electronic systems; to trace the effect ofa change in one subsystem to other integrated subsystems and determine which controls and devices must be change or adjusted to compensate; and to repair, align, and adjust major integrated electronic systems such as inertial navigation systems, and automatic flight control, or fire control systems. 6. Ability to use computer terminals to maintain records and document actions. PHYSICAL EFFORT: Light to moderate physical exertion is required in lifting and carrying items weighing from 10 to 40 pounds, and occasional objects weighing in excess of 40 pounds with the help of weight handling equipment or with assistance from other workers. The work requires standing, bending, and stooping for extended periods of time on concrete or composition floors. Climbing and working in high places (towers) may be required. WORKING CONDITIONS: Employee typically works in well lighted, heated, and ventilated areas. Work is sometimes performed at missile sites, or in aircraft, sometimes outside in inclement weather. Exposed to the possibility of electric shock, burns from electrical or RF energy or hot solder, and cuts and bruises. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Contacts

• Address Travis AFB 540 Airlift Drive Travis AFB, CA 94535 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]