Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as a professional Mechanical Engineer performing operations and maintenance (O&M) engineering duties in support of a military installation. This is a developmental position with known promotion potential to the target position of Mechanical Engineer, GS-0830(24)-12.

Duties

Performs O&M engineering involving design and construction that encompasses the maintenance, repair, upgrade, and operation of infrastructure facilities, including utility systems, utilizing professional knowledge of mechanical engineering. Plans, programs, budgets, and executes required projects in support of assigned programs. Performs planning and design work for substantial sustainment, modernization, repair, improvement, renovations and construction projects for real property facilities, including utility systems, utilizing a professional knowledge of mechanical engineering. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over in-house labor or construction contractors utilizing a professional knowledge of mechanical engineering and knowledge of other engineering disciplines to ensure overall compliance with project requirements. Provides consulting services and project coordination. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• Must be able to obtain and maintain a secret security clearance.
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. (continued)
• Illegal drug use by employee's insensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• May occasionally be required to work overtime, weekends or holidays.
• May be required to serve on A and E selection boards.
• Disclosure of Political Appointments
• May act as project liaison with the Army Corps of Engineers or other design agencies as required.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position.
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
• Eligible for a Cost-of-Living-Allowance (COLA) which is subject to change without notice
• The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. (continued)
• The selectee will have up to 24 months to meet the applicable mandatory experience, education, and training requirements.
• This is a Mission Essential (ME) position performing a Mission Critical Function (MCF) which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions. (continued)
• IAW, DoDI 3020-42, Defense Continuity Programs.

Qualifications

Qualifications: In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Mechanical Engineering Series 0830, Group Coverage Qualification Standard for Professional and Scientific Positions. BASIC REQUIREMENT Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE GS-0830-07 Applicants must have at least one (1) year of specialized experience at the next lower grade GS-05, or equivalent in other pay systems. Examples of specialized experience include knowledge of mechanical engineering concepts and principles as well as the ability to apply standard mechanical engineering practices, methods, and techniques to perform relatively routine projects or a portion of a larger and more complex project; knowledge of computer aided design and drafting (CADD) programs to perform routine design and drafting assignments. SPECIALIZED EXPERIENCE GS-0830-09 Applicants must have at least one (1) year of specialized experience at the next lower grade GS-07, or equivalent in other pay systems. Examples of specialized experience includes knowledge of mechanical engineering concepts, principles, and practices to perform routine projects with complete responsibility, or portions of large and complex projects; knowledge of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. SPECIALIZED EXPERIENCE GS-0830-11 Applicants must have at least one (1) year of specialized experience at the next lower grade GS-09, or equivalent in other pay systems. Examples of specialized experience includes knowledge and abilities applicable to a wide range of mechanical engineering duties; ability to modify standard practices and adapt equipment or techniques to solve a variety of problems; ability to adapt precedents or make significant departures from previous approaches to similar projects in order to provide for the specialized requirements of some projects; and ability to apply the standard practices of related engineering disciplines and architecture as they relate to engineering design; broad understanding of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. SPECIALIZED EXPERIENCE GS-0830-12 Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes knowledge of mechanical engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments; knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications; knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings; knowledge of and familiarity with related fields of work such as architectural, electrical, mechanical, structural, environmental and civil engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-05 level is required for the GS-07 level; one year at the GS-07 level is required for the GS-09 level; one year at the GS-09 level is required for the GS-11; one year at the GS-11 level is required for the GS-12. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: (CONTINUED UNDER EDUCATION) PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

GS-07/09/11

1. Knowledge of basic principles of the classified titled or related field.

2. Skill in communicating factual and procedural information clearly, orally and in writing.

3. Ability to learn basic techniques of the classified title.

4. Ability to analyze problems to identify significant factors, gather pertinent data, and recognize solutions.

5. Ability to plan and organize work and consult effectively with co-workers.

GS-12

1. Professional knowledge of mechanical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines.

2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; of environmental principles, practices, procedures, laws, regulations, and current legislative issues; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds.

3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions; and knowledge of program planning and budgeting cycles, financial control and budget systems and management.

4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings; and technique / skill in drafting sufficient to convey design concepts and ideas and formulate working drawings.

5. Ability to plan, conduct and record site/facilities surveys and inspection; to analyze, interpret, and apply results, rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.

6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships.

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address JB Elmendorf-Richardson 8517 20th Street Suite 203 JB Elmendorf-Richardson, AK 99506 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]