This position is located in the U.S. Department of Agriculture (USDA), Farm Production and Conservation (FPAC) Natural Resources Conservation Service (NRCS), State Office and reports to the State Conservationist. The incumbent is responsible for establishing technical engineering standards and procedures and associated engineering policies, methods of operation, and training field personnel. Provide leadership in all phases of the civil and/or agriculture engineering programs for NRCS.

Duties

Work with the state conservationists on water resources (ASTC-WR) relating to engineering support of all phases of watershed planning and operations. Formulate and recommend state technical policies and procedures for floodwater protection, soil erosion, animal waste, and water quality. Facilitate the transfer technology to practicing Agency professionals by developing supporting job sheets, standard drawings, simple software, and training products. Prepare specifications and guidelines for planning, design, and construction of the structural practices installed under NRCS programs. Develop training plans to ensure personnel are adequately qualified to perform assigned tasks and to develop their skills to an optimum level.

Requirements

• You must be a US Citizen or US National.
• Males born after 12/31/1959 must be Selective Service registered or exempt.
• Subject to satisfactory adjudication of background investigation and/or fingerprint check. If selected you will be sent instructions on obtaining fingerprints. Please note we are not able to reimburse any fees incurred for fingerprints.
• Successful completion of one-year probationary period, unless previously served.
• Subject to one-year supervisory/managerial probationary period unless prior service is creditable. New USDA supervisors must successfully complete all components of the required training program before the end of their probationary period.
• Direct Deposit--Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
• Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify at https://www.e-verify.gov/.

Qualifications

AREA OF CONSIDERATION: Please note that this job opportunity announcement is only open to current Career/Career-Conditional employees of the USDA. If you do not possess this status, you will not receive consideration. TIME-IN-GRADE REQUIREMENTS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level. (Please submit your SF-50 that shows Time-in-Grade eligibility and reflects your title, series, and grade. No Award or General Adjustment SF-50's will be accepted). Basic Qualifications: Must must have a bachelor's or higher degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Must have a combination of education and experience-- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions (Must submit proof of registration or licensure with you application);2) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico (Must submit proof of passing written test with your application);3) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (Must submit transcripts);4) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Must submit transcripts.) MINIMUM QUALIFICATIONS: To be considered minimally qualified for this position, you must demonstrate that you have the required specialized experience and/or education for the respective grade level in which you are applying: GS-13: Must possess one year of specialized work experience equivalent to at least the GS-12 grade level in the Federal service performing the following: Supervising and performing professional engineering and scientific work; Making recommendation for engineering policies, procedures, and standards impacting national programs; Collaborating with staff and engineers on planning and designs for conservation programs; and Evaluating subordinate employees and making recommendations for HR actions. (Your resume must CLEARLY demonstrate this experience.) IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE MAY NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. If your resume does not support your questionnaire answers, we will not allow credit for your response(s). Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. The OPM Qualification Standards for this position can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series

Education

You must submit a copy of your college transcripts or a list of college courses with credit hours, dates completed, and grades received to verify all education requirements (i.e. substitution of education and/or basic education requirement). If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement. You must document all requirements on every vacancy; we cannot use previous determinations as a basis for rating. All required information must be received by the closing date of this announcement, and non-submission of all required documents/documentation will result in non-consideration. Unofficial transcripts will be accepted. This information must be received by the closing date of this announcement. Non-submission of these documents will result in non-consideration.

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Applicants must, therefore, only report attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation via this link. All education claimed by applicants will be verified accordingly. Important: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. Click on this link for more information.

Contacts

• Address Natural Resources Conservation Service 1400 Independence Ave SW Washington, DC 20250 US
• Name: Midwest Services Branch
• Phone: 8164265706
• Email: [email protected]