This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This is a developmental position. The duties of this position lead to the full performance level of GS-0810-12. Incumbent may be selected to either the GS-09, GS-11 or GS-12 (depending on qualifications).

Duties

This position performs planning and engineering design work of coastal engineering. These projects include, but are not limited to breakwaters, jetties, navigation channels, harbor projects, coastal processes assessments, environmental remediation projects, navigation projects, beach erosion control and storm-damage reduction. Also conducts special studies and applies specialized knowledge in wave mechanics, coastal process, coastal engineering and a generalized knowledge of civil engineering. Planning studies, performing design work and performing technical consistency reviews for major coastal projects. Managing and generating technical reports and papers on special monitoring projects that are being conducted within the District.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• TDY travel is required approximately 20 percent of the time.
• Conducts field work and construction site visits involving strenuous hiking on breakwaters and jetties, activities in surf zone, activities on small craft and work boats, and activities along wharves, docks, dredges and marine construction equipment.
• Occasionally makes presentations at coastal engineering workshops and conferences.
• Must be able to obtain and maintain a valid state driver's license.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the experience and education requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for CIVIL ENGINEER: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: GS-09 Specialized Experience: One year of specialized experience which includes assisting with the planning, developing, and analyzing civil engineering drawings and specifications in the coastal engineering field. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineer. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. GS-11 Specialized Experience: One year of specialized experience which includes planning, developing, and analyzing civil engineering drawings and specifications in the coastal engineering field and resolving design related problems. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study]. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. GS-12 Specialized Experience: One year of specialized experience which includes developing design analysis to formulate and evaluate the coastal processes, such as erosions, flooding, sediments, waves, etc and preparing design proposals. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-[insert 11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this position, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted at the GS-12. SELECTIVE PLACEMENT FACTOR REQUIREMENT You must possess a current Professional Engineer (PE) license in good standing issued by one of the 50 states, or its territories at the time of your application for the GS-12 position. For the GS-09 and GS-11 positions you must be willing and able to obtain and maintain a PE license prior to entering the GS-12.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address RI-W2ST03 US ARMY ENGINEER DIST-SAN FRANCISCO DO NOT MAIL San Francisco, CA 94103 US
• Name: Army Applicant Help Desk