Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as Chief and program manager, organizing, directing, and exercising second level supervisory control over employees within the Civil Engineer Squadron Project Management Element.

Duties

-Plans, organizes, and directs the activities of the Element -Exercises supervisory personnel management responsibilities -Represents the Element with a variety of installation and functional area organizations -Communicates and coordinates Element issues with higher headquarters, regulatory agencies, other installation units, community officials, etc. -Directs the development and execution of Element budget and preparation of Planning, Programming, and Budgeting System (PPBS) documentation in support of engineering planning and execution

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• Requires the incumbent to obtain and maintain the appropriate Secret security clearance.
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver’s license may be required.
• May be required to serve as a member of the Emergency Response Force during exercises or in the event of an actual emergency
• Professional registration or license as a Professional Engineer or Registered Architect in one of the 50 states or territories is desired but not required
• The work requires the employee to access facilities and infrastructure which may require climbing on, crawling under or extensive walking at construction sites, hard hat areas or other base areas.
• This position is designated by the Air Force as a Testing Designated Position (TDP) under the Air Force civilian drug-testing program. As a mandatory requirement
• for employment in this TDP, the incumbent is to (a) refrain from the use of illegal drugs and (b) if required, submit to urinalysis testing. The selectee must sign statements acknowledging the position is identified as a TDP
• Subject to a 1 year supervisory probationary period, unless previously met

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions INDIVIDUAL OCCUPATIONAL REQUIREMENT GS-0801/0810/0830/0850-13: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: You must submit a copy of transcripts. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) NOTE: You must submit a copy of transcripts. INDIVIDUAL OCCUPATIONAL REQUIREMENT GS-0808-13: CONTINUED IN EDUCATION In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-12, or equivalent in other pay systems. Examples of specialized experience includes providing management oversight for activities assigned to ensure compliance with engineering legal and regulatory requirements; providing project planning, program development, design, project management, contract execution, and squadron technical support to effectively execute the installation's mission, sustain quality of life, and optimize delivery of products and services; executing the development and execution of the budget within financial guidelines and approved schedules; and researching, interpreting, analyzing, and applying proper engineering guidelines, policies, and regulations. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of a wide range of multidisciplinary, professional asset management and engineering theories, concepts, principles, standards, methods, techniques, materials, and equipment as well as knowledge of standard construction and contracting regulations, practices, and procedures. 2. Knowledge of the principles of planning and program management; common business and economic principles, theories, concepts, and procedures; financial management principles and standards; and the DoD Planning, Programming, Budgeting System (PPBS). 3. Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures. 4. Skill in evaluating state-of-the-art scientific and engineering technologies and incorporating these into the planning, design, operation, maintenance, repair, and upgrade of installation natural/built infrastructure. 5. Ability to analyze, plan, organize, and direct the work operations to meet program requirements and objectives with available resources; and to mentor, motivate, and appraise the staff of an organization. 6. Ability to communicate effectively, both orally and in writing, with senior officials from a broad array of activities, including federal and local government, and industry. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

INDIVIDUAL OCCUPATIONAL REQUIREMENT GS-0808-13: 1. Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. NOTE: You must submit a copy of transcripts.

OR
2. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:-Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.-Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture. NOTE: You must submit a copy of transcripts.

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address Nellis AFB 4475 England Avenue Ste 137 Nellis AFB, NV 89191 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]