This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This Position is with: US ARMY IMCOM, NTC AND FT IRWIN OFFICE OF THE GARRISON COMMANDER DIRECTORATE OF PUBLIC WORKS ENGINEER SERVICES DIVISION DESIGN BRANCH FORT IRWIN, CA 92310

Duties

Develop designs, plans, specifications, cost estimates for electrical wiring, motors, air conditioning units, power distribution systems, stabilized protected ADP power supplies, emergency generators, fire alarms of major size and complexity. Analyze, review and evaluate engineering design drawings and design analysis, specification and documents. and conduct surveys and investigations at project sites; evaluate data and incorporate into specifications. Plan and monitor construction phases to ensure compliance with applicable standards such as Unified Facilities Criteria (UFC), National Electrical Code (NEC), National Fire Protection Association (NFPA). Consult with construction personnel on changes or resolve issues. Review Contractor submittals, shop drawings, samples and material certifications for accuracy, any adjustments and/or comments.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position is designated as moderate risk involving Public Trust. Appointment to this position is subject to a background investigation including a credit check to determine suitability for Federal employment and/or the position.
• Financial Disclosure Statement OGE Form 450 is used to assist agencies and employees to avoid conflicts between duties and financial interest. This position requires pre-employment financial disclosure and annually thereafter.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the experience or education requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Electrical Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: Have one year of specialized experience equivalent to at least the GS-11 grade level in the Federal service which includes the following. Assist in the development of engineering designs, plans or specifications for electrical and power supply systems for completion of new, renovation, and/or repair of real property. Provide recommendations to management regarding policy and program directives for engineering subjects. Develop standards and criteria pertaining to programs such as installation, maintenance, and repair for Electrical Engineering services. Education: Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address ET-APF-W4E6AA NATIONAL TRAINING CENTER AND FT IRWIN DO NOT MAIL Fort Irwin, CA 92310 US
• Name: Army Applicant Help Desk