You will serve as the Naval Air Warfare Center Aircraft Division (NAWCAD) Command Modeling and Simulation Architecture and Digital Innovation Senior Technical Expert, Senior Scientific Technical Manager. You will lead Digital Transformation efforts for NAWCAD and development of environments that support full lifecycle digital thread, digital twins, and analytical decision support capabilities. You will lead vision and strategy for development and advancement of the Joint Simulation Environment.

Duties

You will serve as the Command Modeling and Simulation, Architecture and Digital Innovation Senior Technical Expert, aligned to the Director, Digital Analytics Infrastructure and Technology Advancement Group. You will lead Digital Transformation efforts for NAWCAD and development of environments that support full lifecycle digital thread, digital twins, and analytical decision support capabilities. You will lead vision and strategy for development and advancement of the Joint Simulation Environment (JSE). You will provide expert Live – Virtual – Constructive (LVC) environments advice, guidance and ideas regarding laboratory concepts of employment, engineering technologies, and weapons capabilities and deficiencies. You will provide leadership for extremely complicated technical efforts for untried and extensive science, technology and engineering efforts requiring high performance computing.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position is a designated Critical Acquisition Position (CAP). You must sign a three-year tenure agreement prior to assuming the position unless a tenure waiver is approved.

Qualifications

The applicant is to provide a separate narrative statement which describes fully, but concisely, how his/her experience supports each of the following Mandatory Technical Qualifications. Each technical qualification narrative should not exceed 2 pages. Failure to address these specific qualifications in a separate narrative statement will eliminate you from consideration: 1. Subject Matter Expert (SME) in Modeling and Simulation (M&S) Architecture, Digital Transformation / Digital Engineering, and applies this capability to the RDT&E of Aircraft Mission Systems, Avionics, Simulation Engineering and Advanced Laboratory Development. Demonstrated ability to deliver outcomes while maintaining needed relationships. 2. Knowledge of DoD acquisition policy and strategy. Determines resource requirements and tasks execution of resources to enable successful outcomes for development of advanced Modeling and Simulation (M&S) Architectures, Digital Engineering and capabilities. Knowledge of leading a diverse civilian organization. 3. Demonstrated ability to provide leadership to develop, influence and implement Modeling and Simulation (M&S) Architectures and Technologies and Digital Engineering for Aircraft Avionics and Aircraft Mission Systems development that will integrate with key programmatic, DON, and DoD policies and goals and lead change in areas where needed. 4. Demonstrates capability to ensure NAWCAD development and mission operations execute with a sound engineering basis with proper controls and management of readiness risk. Demonstrates an understanding of individual differences and how workplace diversity and inclusion correlate to the achievement of the vision and mission of NAWCAD. 5. Ability to negotiate complex solutions for Modeling and Simulation (M&S) Architectures and Digital Engineering within specialty areas with major stakeholders with emphasis on positive discourse, mutual trust and respect. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF and 08XX Professional Engineering Series 1550 Computer Science Series Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For 08XX Professional Engineering Series:
A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
-or-
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
(I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or
(II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
(III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or
(IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

OR

For 1550 Computer Sciences Series:
A. Bachelor's degree in computer science
or
B. Bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.

An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.

Contacts

• Address NAVAIRWARCENAC DIV Naval Air Warfare Center Patuxent River, MD 20670-5304 US
• Name: Dept of the Navy Executive Hiring
• Email: usn.seattle-wa.ochrsvdopscenwa.mbx.don-executive-hiring@us.navy.mil