Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to install, maintain, test, troubleshoot, repair, and calibrate various types of moderately complex electronically controlled equipment.

Duties

- Plans and lays out work from electrical and electronic block diagrams, wiring diagrams, schematics, and technical orders. - Performs pretest, operational (functional), and final testing; final tuning; alignment; and/or calibration of moderately complex electronic control systems, components, and/or subassemblies. - Installs, overhauls, repairs, fabricates, and/or modifies various types of electronically controlled industrial equipment characterized by moderate complexity of design, construction, and function. - Performs preventive maintenance on electronic control systems to include disassembly, cleaning, reassembly, and calibration. - Utilizes safety and security practices and procedures following established rules and regulations and maintains a safe, clean, and secure work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays
• Work may occasionally require travel away from the normal duty station
• The employee may be required to travel on military and commercial aircraft
• Shift work may be required
• Emergency overtime may be required
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver's license is required for the position
• This position may require the employee to work under adverse environmental conditions
• Will be required to train/guide lower grade (or other trades) military/civilian employees
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Testing Program. Employee must pass initial and periodic short notice drug testing
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety
• The physical requirements of this position as determined by the manager are: Work assignments require moderate physical effort. Mechanics frequently lift, carry, or otherwise handle items weighing up to 18 kilograms ( 40 pounds)
• Occasionally they handle items greater than 18 kilograms. Assistance is usually available with heavy items
• They work in a sitting position for extended periods. Frequent standing, walking, bending, crouching, reaching, and stooping are required. Occasionally, climbing and working in high places may be required
• This is a Mission Essential (ME) position performing a Mission Critical Function (MCF) which must continue uninterrupted after the occurrence of an emergency
• Position duties must be continued through full resumption of all functions. IA W, DoDI 3020-42, Defense Continuity Programs

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 - Electronic Equipment Installation And Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the Ability To Do the Work of an Electronic Industrial Controls Mechanic without More than Normal Supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of the installation, maintenance, testing, troubleshooting, repair, and calibration of electronically controlled industrial systems, components, and accessories. Knowledge of electronic theory and circuits and basic logic circuits for power, timing, and motion controls, indicating and counting mechanisms, similar devices and a variety of technical data, such as schematics, diagrams, and technical orders relating to the electronics trade. Knowledge of the operation, capabilities, and limitations of electronic systems complicated by a variety of multi­component assemblies and devices. Knowledge of related electrical, mechanical, optical, pneumatic, and hydraulic systems. Knowledge of safety, environmental, and security regulations, practices, and procedures. Skill in the use of hand and power tools of the electronics trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment. PHYSICAL EFFORT: Work assignments require moderate physical effort. Mechanics frequently lift, carry, or otherwise handle items weighing up to 18 kilograms (40 pounds). Occasionally they handle items greater than 18 kilograms. Assistance is usually available with heavy items. They work in a sitting position for extended periods. Frequent standing, walking, bending, crouching, reaching, and stooping are required. Occasionally, climbing and working in high places may be required. WORKING CONDITIONS: Work is usually performed inside in well-lighted, heated, and ventilated areas. When equipment is fixed in place it is sometimes necessary to work in warehouse or industrial areas exposed to loud noises, heat or cold, fumes, etc. Mechanics are subject to injuries such as electric shock, cuts and bruises, as well as burns caused by electrical energy or soldering irons. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Contacts

• Address JB Charleston 101 E Hill Blvd Bldg 503 JB Charleston, SC 29404 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]