About the Position: Position is a Subject Matter Expert (SME) for Mechanical Design (Civil Works Emphasis), Mechanical Section for highly complex and comprehensive civil works projects. Position is with the Louisville District, US Army Corps of Engineers, duty location Louisville, Kentucky. If you do not meet an eligibility listed in this announcement, please go to the public announcement listed under CERE237100032088HW.

Duties

•District Mechanical Engineer Expert on Project Delivery Teams (PDT) for preparation of preliminary and final design studies, drawings, reports/calculations, technical specifications, and labor/material estimates for complex projects/equipment. Review mechanical engineering designs prepared by others including architect-engineer (A/E) firms or other USACE Districts/Centers for complex systems and facilities. Review mechanical portions of contractors/manufacturers shop drawings to evaluate the adequacy and practicability of equipment or system design in conformance with contract requirements. Make field trips to construction or manufacturing sites to perform inspections and testing to determine contract compliance and quality. Provide senior level mechanical engineering expertise during design and construction phases for the most sensitive and/or complex navigation projects. Perform overall District Quality Control reviews and performs Agency Technical Reviews for other Districts. Serves as a consultant for levee and dam mechanical engineering systems, with particular emphasis on large pumping systems and pump stations.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Position requires professional engineering (PE) license. (must submit copy of license)
• Position requires valid state driver's license. (do NOT submit copy of license in application package)

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferOffice of Personnel Management (OPM) Interchange Agreement EligiblePeople with Disabilities, Schedule APriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience: one year of specialized which includes experience in design of mechanical equipment and features of large and complex civil works construction projects; mechanical engineering design; reviewing mechanical portions of contractors and manufacturers drawings to ensure conformance with contract requirements; and coordinating project details with internal and external customers. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (equivalent to GS-12 or above). You will be evaluated on the basis of your level of competency in the following areas: Decision MakingDesignMechanical EngineeringOral Communication Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12)

Education

Basic Education:

Basic Requirement for Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
*MUST SUBMIT COPY OF TRANSCRIPTS, Unofficial to apply, official if selected showing degree conferred.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RE-W2SM02 US ARMY ENGINEER DISTRICT-LOUISVILLE DO NOT MAIL Louisville, KY 40202 US
• Name: Army Applicant Help Desk