This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: Perform foundation analysis and design for assigned civil works, military and Hazardous, Toxic, and Radiological Waste (HTRW) projects such as earth, dams, levees, dredge disposal dikes, bridges, buildings, and other structures supported by soil.

Duties

Provide consulting services to other Districts elements and, as an expert in the field of geotechnical engineering, contributes to the solution of unusual and difficult soils problems. Conduct periodic inspections of assigned Civil Work and Military Construction projects to ensure established criteria is followed to avoid construction problems. Prepare drawings, earthwork specifications, and other design documents for geotechnical portion of assigned projects.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• There are Physical Requirements associated with this position. Wearing of protective equipment, e.g., safety shoes, safety glasses, etc. are required on project sites. Other protective equipment, such as respirators may be periodically required.
• Must be willing and able to participate in the medical surveillance program and attend 40-hours of HTRW training and updates.
• Physical Examination required.

Qualifications

NOTE: THIS IS AN OPEN CONTINUOUS ANNOUNCEMENT. REFERRAL TO BE ISSUED AT MANAGEMENT REQUEST. Who May Apply: US Citizens In order to qualify, you must meet the requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer (Geotechnical): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Minimum Qualifications for Civil Engineer (Geotechnical): GS-07:Specialized Experience:: One year of specialized experience which includes: being responsible for preparation of geotechnical evaluations and design analyses; assisting with soil data analysis; and promoting dam and levee safety by providing geotechnical review and evaluation of a project This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (Blockedhttps://www.achsnatl.org/). OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. GS-09:Specialized Experience:: One year of specialized experience which includes: being responsible for preparation of geotechnical evaluations and design analyses; assisting with soil data analysis; and promoting dam and levee safety by providing geotechnical review and evaluation of a project This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineer (You must submit transcripts) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. Continues in Education section below.

Education

GS-11:
Specialized Experience: One year of specialized experience which includes: being responsible for preparation of geotechnical evaluations and design analyses; assisting with soil data analysis; and promoting dam and levee safety by providing geotechnical review and evaluation of a project This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineer. (You must submit transcripts)

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12:
Specialized Experience: One year of specialized experience which includes: being responsible for preparation of geotechnical evaluations and design analyses; soil data analysis; and promoting dam and levee safety by providing geotechnical review and evaluation of a project; performing foundation analysis and design for assigned civil works, military and Hazardous, Toxic, and Radiological Waste (HTRW) projects such as earth, dams, levees, dredge disposal dikes, bridges, buildings, and other structures supported by soils; developing and reviewing risk assessments, analyzing potential failure modes, and issue evaluation studies; preparing technical reports and design documents This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-11).

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address RL-W07405 US ARMY ENGINEER DISTRICT-SAVANNAH DO NOT MAIL Savannah, GA 31402 US
• Name: Army Applicant Help Desk