This position serves as the Chief, Facility Support Services with responsibility for the professional Engineering programs such as Maintenance and Repair, Utility Plant Operations, Energy Management and Conservation Program, Safety, Fire Prevention, Industrial Hygiene, Disaster Preparedness, Green Environmental Management, Vehicle Fleet, Grounds, Capital Planning, and Construction Project Management section at El Paso VA Health Care System. (EPVAHCS).

Duties

The Chief Engineer has full administrative and managerial responsibilities for planning, staffing, budgeting, developing, and effectively managing the total Program. The Engineering Program functions include, but are not limited to; all planning, design, and supervision of project renovation, modernization, and construction work; safety, industrial hygiene, disaster management, and green environmental management services; fleet, energy conservations services; and all maintenance and repair of building, grounds, building service equipment, utility systems. The Chief Engineer initiates, molds, and sets policy, procedures, standards, and goals for Engineering programs; develops and applies an internal program of management review, appraisal, and improvement; establishes priorities which recognize and incorporate budget and manpower constraints; provides for formal and on-the-job training and instruction for the staff; and coordinates engineering activities with other administrative and clinical services in the EPVAHCS. Engineering Program Management and Administration:

Requirements

Qualifications

To qualify for this position, applicants must meet all requirements by the closing date of this announcement,12/12/2023 Basic Requirements: United States Citizenship: Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy. Education. Bachelor's degree or higher in Engineering or Architecture. To be acceptable, the curriculum must be from a school with at least one curriculum accredited by the Accreditation Board for Engineering and Technology, Engineering Accreditation Commission (excludes engineering technology) or National Council of Architectural Registration Boards curriculum. Examples of acceptable engineering and architectural degrees include, but are not limited to: Electrical Engineering, Mechanical Engineering, Biomedical Engineering, Civil Engineering, Architecture and Architectural Engineering. Titles may vary from educational institutions and change over time; OR Evidence of passing the Fundamentals of Engineering Examination with a bachelor's degree. Evidence can be in the form of an Engineering in Training certificate issued from any State, the District of Columbia, Guam or Puerto Rico, or test results from the National Council of Examiners for Engineering and Surveying (NCEES) identifying a passing score; OR Evidence of current professional registration or licensure as a Professional Engineer or Architect. Evidence of current professional registration or licensure can be from any State, the District of Columbia, Guam or Puerto Rico. Grandfathering Provision. (See note under Additional Information) Foreign Education. (See note under Education) Physical Requirements. See VA Directive and Handbook 5019, Employee Occupational Health Service for requirements. English Language Proficiency. Healthcare Engineer candidates must be proficient in spoken and written English in accordance with 38 U.S.C. § 7403(f). Grade Determinations: Supervisory Healthcare Engineer, GS-14. Experience. One year of experience equivalent to the next lower grade. Knowledge, Skills and Abilities (KSAs). In addition to meeting the experience requirements for this grade level, the candidate must fully demonstrate the following KSAs: Knowledge of mechanical, electrical, structural, civil and other engineering/architectural principles, practices and their applications as related to healthcare facilities. Knowledge related to the management of overall healthcare system resources, (i.e., finances, space, equipment, supplies, schedules and staffing). Skill in using effective communication in managing interpersonal relationships with internal and external customers, stakeholders, executive leadership, labor representatives and managers. Skill in balancing multiple responsibilities, setting priorities, delegating tasks and projects, meeting multiple deadlines, analyzing complex organizational problems and developing and implementing effective solutions that result in efficient operations. Skill in applying considerable independent judgment to interpret broad or general national policies and guidelines and adapt/apply them to specific compliant programs at the local healthcare system. Skill in recognizing and assessing evolving scenarios, utilizing initiative, and self-directing and assigning resources to affect resolutions. Skill in complying with national internal and outside regulatory agency and organization (including, but not limited to TJC, OSHA, NFPA, etc.) regulations, requirements, guides, policies, procedures, directives, standards and general medical program requirements as they relate to healthcare engineering. Ability to anticipate, develop and implement strategies in meeting the healthcare system's short-term and long-term strategic goals in a highly fluid environment. Ability to interview candidates for positions, recommend appointments, advancements, or when appropriate, disciplinary actions; evaluate performance and identify continuing education and training needs. Assignment. For all supervisory assignments above the full performance level, the higher-level duties must consist of significant scope, complexity, difficulty, range of variety and be performed by the incumbent as a major duty at least 25% of the time. The incumbent must supervise staff for at least 25% of the time, administratively and technically at the full performance grade level or below. This Supervisory Healthcare Engineer, GS-14 position is the Chief Engineer. Chief Engineers supervise engineering service, including subordinate the Supervisory Healthcare Engineer(s) at the GS-13 level, to ensure compliance with VA, TJC and a variety of other prevailing codes and standards. In addition to Chief Engineers' integral role in providing capability and capacity for the primary medical mission, they ensure the availability of facilities for complex medical research and participate in community partnerships and supports Department of Defense contingency planning. Chief Engineers supervise the engineering staff to accomplish the operations of the service. As Chief Engineers, they exercise the full range of supervisory responsibility to include but not limited to development of performance standards and performance evaluations; recommendations for appointment, awards, advancements, and when appropriate, disciplinary actions and identification of continuing training needs. Chief Engineers provide for a safe, reliable and precisely controlled operating environment for direct patient care. Chief Engineers serve as experts in the design, sustainment and improvement of the medical care environment, including all hospital building features, automated building management and environmental control systems, critical utility systems and medical equipment technology. They collaborate directly with executive leadership, medical staff, nursing staff and other clinical personnel regarding the design and operation of the environment for medical care. They manage capital asset programs and construction projects. Chief Engineers educate and advise clinical staff on the safe use of critical building features, utility systems and fire prevention systems as they relate to the environment of care. They educate and advise clinical staff on medical equipment technology including selection, operation, safety and security. They ensure the healthcare system complies with a multitude of accreditation and regulatory requirements including, but not limited to, those issued by TJC, OSHA and EPA. Chief Engineers apply engineering concepts and methodologies to enhance the delivery of healthcare by providing a technologically advanced, safe and reliable healthcare environment. They are responsible for the planning, organizing, directing, evaluating and management process for service line programs, which include setting qualitative and quantitative standards. They develop and provide the Executive Leadership Team and the clinical staff information on the methods, techniques and procedures necessary to integrate the engineering, maintenance, biomedical, capital management and other engineering programs into the mission of the medical center. They oversee the TJC, Environment of Care Programs for Utility Systems Management, Safety, Life Safety and Medical Equipment Management for both the assigned medical center and all CBOCs. Preferred Experience: (continued under "Education" below) References: VA Handbook 5005/150, Part II, Appendix G72, March 18, 2022 The full performance level of this vacancy is GS-14. Physical Requirements: The work is sedentary. Some work may require movement between offices, hospitals, warehouses, and similar areas for meetings and to conduct work. Work may also require walking/standing, in conjunctions with travel to and attendance at meetings and/or conferences away from the work site. Incumbent may carry and lift light items weighing less than 15 pounds.

Education

Preferred Experience (Continued from above):

• Preferred Management and Leadership experience/training through demonstrated courses/classes/responsibilities at work.
• Experience in developing projects by gathering, analyzing, implementing data, and developing Statement of Work & conceptual plans, to create procurement packages.
• Experience in Project Management, Contract Administration, Construction Management, Estimating, Budgeting, Scheduling, and Quality Control
• Proficiency interpreting, understanding and communicating policies, directives, guidance and regulatory codes, including; VA, OSHA, EPA, JTC and NFPA.
• Experience in being involved in multiple complex projects simultaneously requiring thorough coordination with several entities developing and maintaining professional relationships.
• Practical experience and advanced theoretical understanding pertaining to the maintenance of structures, utility systems, biomedical and non-medical equipment.

IMPORTANT: A transcript must be submitted with your application if you are basing all or part of your qualifications on education.

NOTE: Foreign Education. (Continued from Basic Requirements)To be creditable, engineering, architecture or related education completed outside the U.S. must be submitted to a private organization that specializes in the interpretation of foreign educational credentials and such education must have been deemed at least equivalent to a Bachelor's degree as outlined in paragraph 3.b. of this appendix.

NOTE: If your school has changed names, or is no longer in existence, you must provide this information in your application.

Note: Only education or degrees recognized by the U.S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Contacts

• Address El Paso VA Clinic 5001 North Piedras Street El Paso, TX 79930 US
• Name: VISN 17 SSU USAS Group
• Email: [email protected]