About the Position: This position is a DOD Cyber Excepted Service (CES) personnel system position in the Excepted Service under 10 USC 1599f. Employees occupying CES positions are in the Excepted Service and must adhere to U.S. Code, Title 10, as well as Department of Defense Instruction 1400.25. This position is located at the 7th Signal Command located at Fort Eisenhower, GA.

Duties

Serve as Lead General Engineer, technical advisor and expert responsible for planning, directing, and implementing the 7th SC (T) facilities management, building management, space allocation and real property management mission. Develops short- and long-range planning, analysis, and development of programming, budgetary, and scheduling documentation to meet mission requirements for, installation management, facilities engineer, and real property manager. Furnishes technical and administrative advice in support of systems studies with engineering input and lifecycle analysis. Performs long-range planning, analysis and development of programming, budgetary, and scheduling documentation to meet mission requirements for facilities management and real property management. Assigns work based on priorities, selective consideration of the difficulty and requirements of the assignment and the capabilities of team members and subordinates. Plans, manages, directs, and controls through subordinates and matrix support personnel, the efforts of prime contractors and subcontractors, other government agencies, field offices, etc. Originates new concepts, methods, and techniques in redirecting programs and approaches to resolve critical or precedent-setting installation management problems or issues.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Three year trial/probationary period may be required.
• Position is designated as Non-Critical Sensitive. Must be able to obtain and retain a Secret security clearance.
• See "Additional Information" section for additional requirements.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Army Cyber Excepted Service (CES) EmployeeCurrent Civilian Employees of the OrganizationCurrent Civilian Employees of the Organization Applying to Cyber Excepted Service (CES) PositionsCurrent Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Current DoD Cyber Excepted Service (CES) Employee (non-Army)Current Permanent DoD Civilian Employee (non-Army) Applying to Cyber Excepted Service Positions Army CES positions apply Veteran's Preference to preference eligible candidates, as defined by Section 2108 of Title 5 U.S.C., in accordance with the procedures provided in DoD Instruction 1400.25, Volume 3005, "CES Employment and Placement". If you are a veteran claiming veterans' preference, as defined by Section 2108 of Title 5 U.S.C., you must submit documents verifying your eligibility with your application package. In order to qualify, you must meet the education AND experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for General Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: To qualify based on your experience, your resume must describe one year of specialized experience that demonstrates the possession of knowledge, skills, abilities, and competencies necessary for immediate success in the position. Such experience is typically in or directly related to the work of the position to be filled. Specialized experience would be demonstrated by overseeing work order contract projects from design development to inspection and approval; Developing instructions, explanatory material and regulations for issuance to subordinate commands in order to supplement guidelines; performing broad program analysis and implements procedures and techniques necessary for project assessment and planning; providing consultation and expert advice on the electrical engineering aspects of proposed and existing plans, designs, and construction activities; And reviewing plans, specifications, and drawings for electrical engineering features in designs for civil works and military projects. Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications.

Contacts

• Address KB-W4NHAA NETCOM DO NOT MAIL Fort Huachuca, AZ 85613 US
• Name: Army Applicant Help Desk