This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will assist other engineers and technicians contributing to the timeliness and accuracy of completion of projects, products, and services of the organization. You will perform tasks that require application of specific standards, methods, and procedures. You will exercise judgement in selecting appropriate guidelines and deciding among alternative approaches and refer situations where existing guidelines are inadequate to the supervisor. You will assist in developing and preparing working drawings, diagrams, drawing revisions, lists of materials, test specifications, memos, sketches, simple calculations and associated functions for convention systems. You will prepare technical reports, memoranda, and rough drafts of technical correspondence on subjects assigned by supervisor. You will provide complete, technically correct analysis of work package requirements to resolve technical issues or develop engineered solutions to problems related to complex systems or equipment.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.

Qualifications

For GS-09: In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-07 grade level pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Providing professional engineering support of technical, mechanical, or electrical services for components, support equipment, or facilities associated with an engineering program. GS-07: In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-05 grade level pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Providing professional engineering support of technical, mechanical, or electrical services for components, support equipment, or facilities associated with an engineering program. GS:05: Your resume must demonstrate that you meet the basic requirements of the individual occupational requirements listed in the Education section below. Additional qualification information can be found from the following Office of Personnel Management website: https: //www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf or https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Substitution of education for experience for GS-07:
1 year of graduate-level education or a bachelor's degree with superior academic achievement.

For GS-09:
2 years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree.

Basic requirements for all grades

Applicants who meet the basic requirements described in the individual occupational requirements are fully qualified for the specified entry grade (generally grade GS-5). Applicants who wish to qualify for positions at higher grade levels (generally grade GS-7 and above) must also meet the requirements shown in the table on page IV-A-22, in addition to meeting the basic requirements.

The individual occupational requirements typically provide at least two methods for applicants to meet the basic requirements of the occupations covered by this standard:

1. Successful completion of a full 4-year course of study in an accredited college or university leading to a bachelor's or higher degree that included a major field of study or specific course requirements generally as stated in paragraph A in the individual occupational requirements.

   Where specific course requirements are not indicated in paragraph A, the number of semester hours required to constitute a major field of study is the amount specified by the college or university attended. If this number cannot be obtained, 24 semester hours will be considered as equivalent to a major field of study. The nature and quality of this required course work must have been such that it would serve as a prerequisite for more advanced study in the field or subject-matter area. Related course work generally refers to courses that may be accepted as part of the program major.

2. Appropriate combination of education and experience that is typically specified in paragraph B of the individual occupational requirements. The "paragraph B" method generally requires that an applicant possess a core of educational credit, such as described in paragraph A above, plus additional education and/or experience. The method of determining the number of semester hours required to constitute a major field of study is the same as described in paragraph A.

   Individual Occupational Requirements

Basic Requirements:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.

Contacts

• Address PSNS and IMF 1400 Farragut Ave Bremerton, WA 98314 US
• Name: Department of Navy EIC
• Email: [email protected]