You will serve as an ELECTRONIC MECHANIC in the Commanding Officer, Facility, and Infrastructure Management Department; and Facility and Plant Maintenance Department of FLEET READINESS CENTER SOUTHWEST.

Duties

You will perform depot level overhaul, disassembly, repair, modification, assembly, testing, troubleshooting, alignment, installation, and maintenance on complex electronic systems. You will maintain ongoing prototype systems as well as implement maintenance and repair procedures on major modifications of systems previously assigned to the activity. You will write and or load the test program for the unit under test, select appropriate interface device, connect required stimulation and measurement blocks, and hook up the unit under test and use an electronic keyboard to run the test procedure. You will work from manufacturer's specifications, schematics, block diagrams, and technical orders, determine the operation of circuits, locate points from which to take readings, and analyze circuit layout to complete necessary visual inspection.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• You will be required to successfully complete a pre-appointment physical examination.
• Incumbent will be required to be CPR certified for this position.
• This position requires the ability to obtain and maintain required level(s) of certification and/or training.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION, and performing tasks such as 1) Assisting in determining work sequence, selecting test equipment, locating malfunction, and completing repairs for assigned electronic systems; 2) Following oral and written instructions, trade practices, processes, and procedures while accomplishing assignments; 3) Utilizing tools to repair and install electronic equipment; 4) Removing and replacing defective parts and assemblies for electronic systems. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Contacts

• Address FLEET READINESS CENTER SOUTHWEST Fleet Readiness Center Southwest PO Box 347058 San Diego, CA 92135-7058 US
• Name: Department of Navy EIC
• Email: [email protected]