Job opening: Mine Safety and Health Inspector
Salary: $51 934 - 99 914 per year
Published at: Nov 20 2023
Employment Type: Full-time
These positions are located with Dept of Labor, Mine Safety & Health Administration (MSHA), Enforcement, Vacaville District, Kent Field Office.
MSHA works to prevent death, illness and injury from mining; promote safe and healthful workplaces for U.S. miners. MSHA carries out the provisions of the Federal Mine Safety and Health Act of 1977 (Mine Act) as amended by the Mine Improvement and New Emergency Response (MINER) Act of 2006.
This position is inside the bargaining unit.
Duties
This is a career ladder progression position; the duties described below are at the GS-11 level. If selected at a grade below GS-11, the incumbent will serve in a developmental capacity, wherein the work is less complex in nature and the supervisor, or a senior level employee provides specific instruction and guidance. At the GS-11 grade level, the incumbent:
Requirements
- Must be a U.S. Citizen.
- Must be at least 16 years old.
- Candidate required to obtain the necessary security/investigation level.
- Requires a probationary period if the requirement has not been met.
- Requires a valid driver's license.
- Subject to pre-employment and random drug tests.
- Requires medical exam and must maintain physical requirements.
- Subject to financial disclosure requirements.
- Applicants must meet all legal and regulatory requirements. Reference the "Required Documents" section for additional requirements.
Qualifications
To qualify for this position, your application and resume must clearly show that you possess the experience and/or education requirements as defined below. If qualifying based on experience, be sure these types of examples are evident in your resume.
The Mine Safety and Health Inspection Series, GS-1822, has basic requirements for positions covered by this standard. Applicants must meet the basic requirements (IOR) to qualify.
Specialized Experience is the experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to perform the duties of the position successfully, and that is typically in or related to the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level.
To qualify for the GS-07 level:
Specialized Experience: One year (52 weeks) of specialized experience equivalent to at least the next lower level, GS-05, of Federal service: On-site safety/health inspection, analysis, monitoring, or evaluation work in occupational health, or mining or closely related industries, such as building construction, excavation, and heavy industrial plant settings.
Examples of creditable experience in related non-mining work include work that provided the applicant with knowledge of ground control at building sites, safe worksite practices, and/or environmental conditions that affect the health of workers at foundries, mills, and other inherently dangerous industrial settings. For example, performance of safety and health inspection work at a steel mill would qualify at this grade level, but agricultural inspection work would not.
OR
Education: One full academic year of graduate level education in a field of study such as mining engineering, civil engineering, mechanical engineering, electrical engineering, industrial engineering, environmental engineering, industrial hygiene, occupational health and safety, geology, chemistry, or other fields of study related to mine safety and health work.
OR
Combination of Experience and Education: Equivalent combinations of education and experience listed above; the total percentage must equal at least 100%.
To qualify for the GS-09 level:
Specialized Experience: One year (52 weeks) of specialized experience equivalent to at least the next lower level, GS-07, of Federal service: Mining, mine engineering, or on-site mine safety and health inspection experience performing a full range of tasks and operating a variety of equipment in underground or surface mines, or mineral processing plants. This includes practical mining experience in planning, installing, operating, monitoring, or maintaining a system or equipment for extracting the ore from the earth.
Specialized experience should include extensive hands-on mining experience that provided the applicant with a comprehensive knowledge of mining methods, equipment, and occupational health and safety hazards. Specifically, applicants should have knowledge of the transportation of materials and workers, ventilation in closed spaces, ground control, roof control (for underground positions), handling and storage of hazardous materials, worksite safety practices, worksite environmental conditions that affect the health of workers, and/or accident prevention.
OR
Education: Two full academic years of graduate level education or master's or equivalent graduate degree in a field of study such as mining engineering, civil engineering, mechanical engineering, electrical engineering, industrial engineering, environmental engineering, industrial hygiene, occupational health and safety, geology, chemistry, or other fields of study related to mine safety and health work.
OR
Combination of Experience and Education: Equivalent combinations of education and experience listed above; the total percentage must equal at least 100%.
To qualify for the GS-11 level:
Specialized Experience: One year (52 weeks) of specialized experience equivalent to at least the next lower level, GS-09 of Federal service: Performing mine safety and health inspection, analysis and evaluation of health/safety aspects of mining industry operations and processes; or evaluation, analysis or development of agency programs.
Examples of creditable experience include: Direct on-site inspection; special accident investigation; development of mine safety and health standards; data analysis and evaluation of operational mine safety and health programs; special assessments; and development of industry-wide training or safety and health awareness programs.
There is no substitution of education for the required specialized experience at the GS-11 grade level.
Medical Requirements
Applicants and employees must be physically able to perform arduous duties efficiently and without hazard to themselves or others. Medical examination is required for all applicants for positions that involve regular or intermittent performance of inspection, investigation, rescue duties, or duties involving on-site visits. Medical conditions that constitute a hazard to safe and efficient job performance are disqualifying. The presence of medical disorders that would be aggravated by the environmental conditions of these positions and thereby hinder safe and efficient job performance are also disqualifying.
Remediable defects and/or curable diseases will not permanently disqualify an applicant for appointment, but may result in the applicant's suspension from the appropriate list of eligibles pending submission of medical evidence or correction of the condition.
Uncorrected distant vision must test at least 20/50 Snellen in one eye and 20/70 in the other, correctable with eyeglasses (contact lenses are not acceptable) to at least 20/30 Snellen in one eye and 20/50 in the other. Near vision must be sufficient to read without strain printed material the size of typewritten characters Normal depth perception and field of vision are required, as is the ability to distinguish basic colors.
Applicants, with or without the use of a hearing aid, must have no hearing loss in either ear of more than 40 decibels in the 500, 1000, or 2000 Hz ranges.
Education
Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.
If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum coursework requirements for this position. Click Evaluation of Foreign Education for more information.
Contacts
- Address Mine Safety and Health Administration
200 Constitution Avenue NW
Washington, DC 20210
US
- Name: Tracy Sakato
- Phone: 240-867-2007
- Email: [email protected]
Map